Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Work In Progress Revised Templates

Kai'el Brat "Guardian of the Light"

FFS – Micro-Flechette – Blackout


  • IntentIon-disruption variant of the micro-flechette, designed to damage or disable electronics, droid systems, and energy-based sensors on impact while retaining baseline anti-lightsaber capability.
    Image SourceN/A
    Canon LinkN/A
    PermissionsN/A
    Primary SourceN/A

  • Manufacturer Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Affiliation Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Market StatusClosed-Market
    ModelFFS-MF-BO
    ModularityNo
    ProductionLimited
    MaterialAdamantite core; ferroceramic coating; cortosis-lined micro-fins (cortosis weave); micro-ion spike assembly; compact high-discharge capacitor; micro-sabot/cassette carrier.

  • Size: 4.5 mm × 3.8 mm.
    Cortosis-lined fins standard for anti-lightsaber defense.
    Integrated micro-ion spike discharges on impact to disrupt electronics.
    Capacitor-driven for high intensity over a very short burst.

  • Retains baseline saber resistance; cripples unshielded electronics/droids; effective against targeting systems and sensor arrays; compatible with mixed-load cassettes.

  • Limited ion range — must make direct contact; reduced penetrator mass due to capacitor assembly; less effective against heavily shielded electronics; diminished long-range ballistic performance.

  • The "Blackout" modifies the FFS-MF platform with a compact ion spike and capacitor system, turning each shot into a point-contact EMP. Upon impact, it floods the target with an electrical surge capable of disabling droids, frying unshielded circuits, and disrupting sensor systems. Retains the adamantite core, ferroceramic nose, and cortosis-lined fins standard across the line.

 
Kai'el Brat "Guardian of the Light"

FFS – Micro-Flechette – Incendiary


  • IntentIncendiary payload variant of the micro-flechette, designed to ignite targets and spread heat damage upon penetration while retaining baseline anti-lightsaber capabilities.
    Image SourceN/A
    Canon LinkN/A
    PermissionsN/A
    Primary SourceN/A

  • Manufacturer Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Affiliation Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Market StatusClosed-Market
    ModelFFS-MF-F
    ModularityNo
    ProductionLimited
    MaterialAdamantite core; ferroceramic coating; cortosis-lined micro-fins (cortosis weave); thermite-incendiary micro-tip charge; micro-sabot/cassette carrier.

  • Size: 4.5 mm × 3.8 mm.
    Cortosis-lined fins standard for anti-lightsaber defense.
    Thermite-based micro-incendiary payload ignites upon penetration.
    Sustained burn capable of damaging armor internals or flammable targets.

  • Retains baseline saber resistance; thermite burn damages even through armor penetration; excellent for anti-personnel or anti-material disruption; effective in low-oxygen ignition scenarios.

  • Payload is single-use and cannot be inerted; reduced penetrator mass from incendiary chamber; risk of collateral ignition in sensitive environments; less effective against heavily flame-retardant armor.

  • The "Incendiary" variant integrates a micro-scale thermite charge within the tip, designed to ignite on impact and cause sustained burning damage inside armor or against unprotected targets. Built on the same adamantite core and ferroceramic nose as the rest of the line, with cortosis-lined fins standard.

 
Kai'el Brat "Guardian of the Light"

FFS – Micro-Flechette – Frostbite


  • IntentCryogenic payload variant of the micro-flechette, intended to freeze and embrittle targets, impair biological function, and disrupt mechanical systems while retaining baseline anti-lightsaber capability.
    Image SourceN/A
    Canon LinkN/A
    PermissionsN/A
    Primary SourceN/A

  • Manufacturer Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Affiliation Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Market StatusClosed-Market
    ModelFFS-MF-FB
    ModularityNo
    ProductionLimited
    MaterialAdamantite core; ferroceramic coating; cortosis-lined micro-fins (cortosis weave); micro CryoBan ampoule-tip; micro-sabot/cassette carrier.

  • Size: 4.5 mm × 3.8 mm.
    Cortosis-lined fins standard for anti-lightsaber defense.
    CryoBan ampoule-tip ruptures on impact, rapidly freezing contact surfaces.
    Can cause brittle failure in metals, and frostbite/shock in organics.

  • Retains baseline saber resistance; rapidly disables unarmored biological targets; can seize up unshielded mechanisms; potentially causes armor embrittlement for follow-up shots.

  • Reduced penetrator mass due to CryoBan reservoir; less effective against insulated armor or cold-hardened systems; payload disperses quickly in open air; risk to user if munitions are damaged before firing.

  • The "Frostbite" variant adds a micro-ampoule of CryoBan to the adamantite and ferroceramic core design, enabling it to freeze and embrittle targets on contact. Retains the cortosis-lined fins of the baseline design, allowing for anti-lightsaber utility while offering a specialized cryogenic effect.

 
Kai'el Brat "Guardian of the Light"

FFS – Concussion-EMP-Sonic Grenade


  • IntentMulti-effect tactical grenade combining concussive blast, EMP/ion pulse, and sonic disruption in a single detonation for maximum disorientation and system shutdown potential.
    Image SourceN/A
    Canon LinkConcussion Grenade | EMP Grenade
    PermissionsN/A
    Primary SourceN/A

  • Manufacturer Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Affiliation Braze Braze Force Forged Sabercrafts | Force Forge - Sabercraft
    Market StatusClosed-Market
    ModelFFS-CES
    ModularityNo
    ProductionLimited
    MaterialDurasteel grenade casing; reinforced shock-dampening liner; high-capacitor ion discharge core; shaped sonic emitter array; high-density concussion charge.
    • Durasteel – Durable grenade casing.
    • Concussion Charge – Stagger and knockback effect.
    • EMP/Ion Pulse – Disables electronics, HUDs, targeting systems.
    • Capacitor – Stores energy for EMP burst.
    • Sonic Emitter Array – Causes disorientation and auditory overload.

  • Simultaneous triple-effect detonation:
    Concussive shockwave: staggers and knocks down targets in radius
    EMP/Ion pulse: disables unshielded electronics instantly; reboot times vary
    Sonic burst: disrupts hearing and balance; auditory disruption lasts 10–30 seconds,
    Effective radius: 6 meters (concussive) / 8 meters (EMP) / 10 meters (sonic).

  • Multi-effect disables both organics and electronics in a single throw; ideal for anti-Mandalorian, anti-droid, and CQB disorientation; hard to counter all effects simultaneously.

  • Short effective radius compared to single-purpose grenades; EMP and sonic effects can be mitigated by specialized armor or ear protection; concussive power less than dedicated concussion-only grenades.

  • The FFS-CES is a triple-threat tactical grenade designed to overwhelm enemy defenses by hitting them on every front at once. Upon detonation, a shaped concussion charge staggers and knocks targets off balance, while a high-capacitor ion core releases an EMP pulse to fry electronics. Simultaneously, a tuned sonic emitter unleashes a deafening, disorienting burst to keep targets reeling.
    Favored for anti-Mandalorian, anti-droid, and boarding actions, the CES is restricted to specialized units due to its complex design and potential for collateral disorientation in friendly forces.

 

Users who are viewing this thread

Top Bottom