Work In Progress Ame's Factory Standby

[Amelia von Sorenn]

MX-T57 TYPE AIRSPEEDER​

OUT-OF-CHARACTER INFORMATION

Intent

A variant of the T-47 Airspeeder for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	T-47 Airspeeder
Primary Link(s)	MX-T28 Type Airspeeder

PRODUCTION INFORMATION

Manufacturer	Aether Systems
Affiliation	Mandalorian Empire
Model	MX-T57
Modularity	No
Market-Status	Closed-Market
Production	Mass-Produced

Materials

Hull Plating	Internal Structure	Additional
Quadanium Steel	Duralloy	Chromium
Nyix-Alloy	Titanium	Crystasteel
Doonium	Aluminium	Trimantium
Trimantium	Duraplast	Vehicle Components

TECHNICAL INFORMATION

Classification	Airspeeder
Role(s)	Combat Airspeeder
	Aerial Assault
	Patrol Craft
Size	Large
Weight	Heavy

Rating Specifications

Armaments	Very High
Defenses	Very High
Maneuverability	Very Low
Speed	Very Low
Propulsion	Repulsorlift

Armaments and Defenses

(2) X2-100 Laser Cannons	Deflector Shield Generator
(1) Rear-Facing RG-9 Laser Cannon	Reinforced Heavy Ablative Armor
(1) Mo/Dk Power Harpoon	AR-0B Damage Reduction Component
(1) Proton Bomb Launcher	(2) Missile Deactivation Transmitters
(6) Proton Bombs	(2) MJU-9G Flare Dispensers

ADDITIONAL INFORMATION AND LOGISTICS

Crew Compliment	1 Pilot
	2 Gunners
Minimum Crew	1 Individual
Passenger Capacity	None
Cargo Capacity	20 Kilograms
Consumables	3 Galactic Standard Days

SPECIAL FEATURES

Aerial Sensor CO-0012 Energy Coupler Gravmotor Alternator Turbothrust Converter Coil Thrust Louver Stabilizer Rover Surveillance Tagger KD57 3-Chamber Repulsorlift Engine FW62 Compact Fusion Drive System (2) KD49 Repulsorlift Drive Units (2) 5i.2 High-Powered Ion Drive Afterburner

STRENGTHS

Heavy Close Air Support Armament - Armed with twin X2-100 Laser Cannons, a rear-facing RG-9 Laser Cannon, and a Proton Bomb Launcher, the MX-T57 delivers devastating firepower against infantry, light vehicles, fortified positions, and concentrated enemy formations, while the larger, heavier frame provides superior firing stability during attack runs, improving accuracy for laser cannon strikes and proton bomb deployment.

Exceptional Survivability - Reinforced Heavy Ablative Armor, a Deflector Shield Generator, and Damage Reduction components provide the craft with durability far beyond that of most atmospheric speeders, allowing it to remain in contested airspace longer than lighter reconnaissance platforms, with missile deactivation transmitters and flare dispensers providing layered protection against guided munitions and hostile aircraft.

Anti-Armor Capability - The MX-T57 is equipped with the legendary Mo/Dk Power Harpoon, enabling the craft to engage walkers, heavy ground vehicles, and entrenched targets via tethered operations inspired by the historical Rebel tactics used during the Battle of Hoth.

Excellent Patrol Platform - Heavy protection, substantial weaponry, and long-endurance systems make the craft ideal for border patrol, convoy escort, and prolonged atmospheric security missions.

​

WEAKNESSES

Very Low Speed and Maneuverability - The substantial armor package and expanded weapons load significantly reduce top speed, making the MX-T57 slower than most dedicated reconnaissance craft and interceptor speeders. Unlike the somewhat nimble MX-T28 or lighter airspeeders, the T57 struggles with evasive maneuvers, rapid directional changes, and close-quarters aerial engagements.

Large Combat Profile - Its increased size and heavy configuration make it easier for enemy anti-aircraft gunners, missile systems, and hostile pilots to acquire and track, and its heavy armor, larger frame, and stronger engine signature make the MX-T57 less discreet than dedicated reconnaissance speeders.

Limited Bomb Capacity - While powerful, the proton bomb launcher carries only six bombs in its magazine, with extended strike operations rapidly exhausting its primary assault payload.

Vulnerable During Attack Runs - Proton bombing missions often require predictable flight paths, making the craft more susceptible to concentrated anti-aircraft fire despite its strong defenses.

​

DESCRIPTION

The MX-T57 Type Airspeeder is a heavily armed atmospheric combat craft developed by Aether Systems for service within the Mandalorian Empire. Drawing inspiration from the legendary T-47 Airspeeder and incorporating lessons learned from the successful MX-T28 program, the MX-T57 was conceived as a dedicated battlefield gunship capable of surviving and dominating hostile airspace where lighter speeders would be forced to withdraw. Designed primarily for combat airspeeders, aerial assault, and patrol operations, the MX-T57 sacrifices the speed and agility of traditional reconnaissance craft in favor of overwhelming firepower and exceptional battlefield durability. Twin X2-100 Laser Cannons provide powerful forward-facing offensive capability, while a rear-mounted RG-9 Laser Cannon protects the craft's vulnerable aft section from pursuing enemies. Its Proton Bomb Launcher further enhances its battlefield role, allowing Mandalorian forces to conduct precision strikes against hardened defenses, infantry concentrations, and enemy vehicle formations. One of the craft's most distinctive features is the inclusion of the historic Mo/Dk Power Harpoon, a weapon system famously employed by Rebel forces during the Battle of Hoth. Adapted for modern Mandalorian service, the harpoon allows the MX-T57 to engage heavily armored walkers and large ground vehicles through specialized tethering and entanglement tactics. Protected by reinforced ablative armor, advanced shielding systems, and multiple defensive countermeasures, the MX-T57 is capable of enduring punishment that would destroy lighter airspeeders. Though its considerable weight reduces speed, acceleration, and maneuverability, Mandalorian commanders value the platform as a reliable aerial assault asset that can support ground forces in prolonged engagements. Within the Mandalorian military, the MX-T57 has earned a reputation as a flying siege engine - slow, heavily armored, and devastatingly effective when unleashed against entrenched enemy positions.

 

[Amelia von Sorenn]

ALII'GAI BESKAD​

OUT-OF-CHARACTER INFORMATION

Intent

Cutlass-style traditional Mandalorian Saber for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Beskad
	Sword
Primary Link(s)	Cutlass

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Mandalorian Empire
Model	Alii'gai
Modularity	No
Market-Status	Closed-Market
Production	Mass-Produced

Materials

Blade Composition	Hilt Composition	Additional
Mandalorian Iron	Mandalorian Iron	Plastoid
Durasteel	Neuranium	Melee Weapon Components
Vandinite	Durite

TECHNICAL INFORMATION

Classification	Sword
Size	Average
Weight	Average

ADDITIONAL INFORMATION

Average Mass	1.1 Kilograms
Total Length	80 Centimeters
Blade Length	61 Centimeters
Grip Length	19 Centimeters
Blade Type	Single-Edge Saber
Hilt Type	Protective Knuckle Bow

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Neutronium Edge Hilt Components Hilt Guard Contoured Grip Miscellaneous Durasteel Bonding Self-Sharpening Sheath

STRENGTHS

Exceptional Cutting Power - The combination of a monomolecular edge, mullinie edge treatment, and neutronium reinforcement allows the blade to produce devastating cuts with relatively little force. Armor gaps, exposed joints, and unprotected targets are particularly vulnerable.

Edge Retention - The mullinine-enhanced edge maintains its sharpness for extended periods, reducing performance degradation during prolonged campaigns or repeated engagements.

Durable Construction - Constructed from Mandalorian Iron and reinforced through Durasteel Bonding, the Alii'gai is highly resistant to chipping, warping, and structural damage. It is capable of withstanding heavy combat conditions while remaining functional.

Hand Protection - A protected knuckle-bow hilt shields the wielder's hand from glancing strikes, impacts, and weapon slides, making it effective during close-quarters engagements and blade-to-blade combat.

​

WEAKNESSES

Reduced Leverage - The contoured grip favors comfort and precision over leverage. While easier to control, it limits the amount of force that can be transferred through a strike, making the Alii'gai less effective at delivering crushing or overpowering blows compared to heavier beskads.

Single-Edge Design - As a traditional single-edge saber, offensive options are more limited than those available to double-edged swords. Reverse-edge attacks and certain recovery techniques are less practical, and the weapon's effectiveness depends heavily on maintaining proper edge alignment.

Close-Range Specialization - With an 80-centimeter overall length and a 61-centimeter blade, the Alii'gar sacrifices reach compared to larger swords, polearms, and other dedicated battlefield weapons and is more practical in close-quarters combat settings such as the narrow corridors aboard starships and in buildings.

Limited Impact Trauma - Despite its excellent cutting ability, the Alii'gai is not optimized for concussive damage. Opponents wearing exceptionally resilient armor may resist injury better than they would against heavier, momentum-focused weapons.

​

DESCRIPTION

The Alii'gai Beskad is a modern interpretation of the traditional Mandalorian Saber, blending the proven combat philosophy of the beskad with the combat practicality of a naval cutlass. Manufactured by Aether Arms Division for the exclusive use of the Mandalorian Empire, the Alii'gai features a single-edge blade, protective knuckle-bow hilt, and ergonomic contoured grip. The weapon is designed for aggressive close-quarters combat while maintaining exceptional control and maneuverability. Forged from Mandalorian Iron and strengthened through Durasteel Bonding, the Alii'gai possesses considerable durability and resilience against the wear of sustained battlefield use. Its cutting performance is further enhanced by the integration of a monomolecular edge reinforced with mullinine and neutronium, which grants the blade exceptional sharpness, edge retention, and structural integrity. These qualities allow the weapon to inflict severe wounds with precise strikes while remaining reliable under demanding conditions. To reduce maintenance demands, each Alii'gai is issued with a self-sharpening sheath that continuously hones the blade while holstered, ensuring the weapon remains combat-ready at all times. Though its ergonomic grip and compact dimensions limit leverage and raw striking power compared to larger beskads, the Alii'gai excels as a dependable and highly refined dueling weapon favored by Mandalorian Warriors who value precision, resilience, and versatility in equal measure.

 

[Amelia von Sorenn]

VHETT'TOME BESKAD​

OUT-OF-CHARACTER INFORMATION

Intent

Wakizashi-style traditional Mandalorian Saber for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Sword
	Katana
	Short Sword
Primary Link(s)	Wakizashi

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Mandalorian Empire
Model	Vhett'Tome
Modularity	Yes
Market-Status	Closed-Market
Production	Mass-Produced

Materials

Blade Composition	Hilt Composition	Additional
Mandalorian Iron	Mandalorian Iron	Greel Ebonwood
Durasteel	Neuranium	Cyrene Silk
Vandinite	Durite	Melee Weapon Components

TECHNICAL INFORMATION

Classification	Short Sword
Size	Average
Weight	Average

ADDITIONAL INFORMATION

Average Mass	650 Grams
Total Length	85 Centimeters
Blade Length	60 Centimeters
Grip Length	25 Centimeters
Blade Type	Curved Single-Edge
Hilt Type	Protective Hand Guard

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Neutronium Edge Hilt Components Hilt Guard Agrinium Grip Miscellaneous Durasteel Bonding Scabbard

STRENGTHS

Superior Cutting Performance - The curved single-edge blade naturally excels at drawing cuts and slashing attacks, which, combined with its monomolecular edge augmented with mullinine and neutronium, allows the Vhett'Tome to inflict severe lacerations with comparatively little effort. The mullinine enhancement also allows the blade to maintain its keen edge through prolonged use, reducing maintenance requirements and ensuring consistent battlefield performance.

Exceptional Close-Quarters Weapon - As a short sword modeled after a wakizashi, the Vhett'Tome remains highly effective in confined spaces such as corridors, starships, urban environments, and interior structures where longer weapons may become cumbersome. Its lightweight of 650 grams also offers excellent maneuverability, enabling rapid cuts, quick recoveries, and fluid transitions between offensive and defensive actions.

Durable Construction - Mandalorian Iron construction, reinforced by Durasteel Bonding, grants the weapon significant resistance to wear, chipping, and structural damage despite its relatively lightweight frame.

Hand Protection - The tsuba-style protective hand guard helps prevent an opponent's blade from sliding onto the wielder's hand during parries, binds, and close exchanges, improving survivability during melee combat. The tsuba-style guard also helps keep the weapon balanced by acting as a counterweight, with heavier guards shifting the balance closer to the handle for faster handling, and lighter guards shifting it towards the tip, which is preferred for cutting practice.

​

WEAKNESSES

Limited Reach - As a short sword, the Vhett'Tome sacrifices reach in exchange for maneuverability. Opponents wielding full-sized swords, polearms, or spears can often engage from safer distances, mitigating the weapon's exceptional close-quarters qualities.

Curved Blade Reduces Thrusting Efficiency - Although capable of powerful thrusts, the curved-blade geometry is inherently less efficient for straight-line penetration than dedicated thrusting weapons such as the Kal Vibrodagger or traditional rapiers.

Singled-Edged Design - The weapon lacks the versatility of a double-edged blade, limiting certain attack angles and reducing effectiveness during reverse-edge techniques.

Moderate Defensive Surface - The tsuba-style guard protects the hand but provides less overall protection than larger basket hilts, knuckle bows, or full guards found on some other Mandalorian weapons.

Requires Aggressive Engagement - Due to its shorter reach, wielders must often close distance against larger weapons, exposing themselves to counterattacks while attempting to enter effective strike range.

​

DESCRIPTION

The Vhett'Tome Beskad is a wakizashi-inspired variation of the traditional Mandalorian Beskard produced with the Aether Arms Division for the exclusive use by the Mandalorian Empire, combining the resilience and cutting power of Mandalorian craftsmanship with the compact practicality of a short sword. Designed for close-quarters combat, the weapon features a curved single-edged blade and a protective tsuba-style hand guard, making it both agile and lethal in confined spaces. Forged from Mandalorian Iron and strengthened through Durasteel Bonding, the Vhett'Tome is built to endure the hardships of prolonged combat while maintaining structural integrity and combat effectiveness. Its blade incorporates a monomolecular edge further enhanced by mullinine and neutronium treatments, granting extraordinary sharpness, exceptional edge retention, and the ability to inflict devastating wounds through both cutting and thrusting attacks. The weapon's Agrinium grip reduces overall weight while shifting balance toward the blade, improving point control and allowing deeper penetration when thrusting. This forward balance also enhances the momentum of slashing attacks, making the Vhett'Tome particularly effective at delivering rapid, flowing cuts. The inclusion of a traditional tsuba provides valuable protection for the wielder's hand during defensive exchanges while preserving the weapon's streamlined handling characteristics. This tsuba-style guard also serves as a counterweight, balancing the weapon; heavier tsuba-guards shift the balance closer to the hilt for faster handling, while lighter guards shift the weight towards the tip, which is preferred for cutting. Carried within a scabbard that may range from a simple field design to an ornate ceremonial piece displaying a wielder's Clan Signet, the Vhett'Tome serves as both a practical battlefield weapon and a symbol of Mandalorian martial tradition. Though it lacks the reach of larger beskads or polearms, its combination of speed, durability, precision, and cutting power makes it a favored weapon among warriors who expect to fight in the tight confines of ships, settlements, and urban battlefields.

 

[Amelia von Sorenn]

VHEH'TOME KAL​

OUT-OF-CHARACTER INFORMATION

Intent

Tanto-style traditional Mandalorian Kal Dagger for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Kal Dagger
	Katana
	Short Sword
Primary Link(s)	Vhett'Tome Beskad
	Tanto

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Mandalorian Empire
Model	Vheh'Tome
Modularity	Yes
Market-Status	Closed-Market
Production	Mass-Produced

Materials

Blade Composition	Hilt Composition	Additional
Mandalorian Iron	Mandalorian Iron	Greel Ebonwood
Durasteel	Neuranium	Cyrene Silk
Vandinite	Durite	Melee Weapon Components

TECHNICAL INFORMATION

Classification	Dagger
Size	Small
Weight	Light

ADDITIONAL INFORMATION

Average Mass	400 Grams
Total Length	45 Centimeters
Blade Length	30 Centimeters
Grip Length	15 Centimeters
Blade Type	Curved Single-Edge
Hilt Type	Unprotected Hilt

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Neutronium Edge Hilt Components Hilt Agrinium Grip Miscellaneous Durasteel Bonding Scabbard

STRENGTHS

Excellent Utility Weapon - The Vheh'Tome's compact size, lightweight construction, and razor-sharp edge make it useful not only in combat but also for everyday tasks such as food preparation, cutting materials, crafting, and general labor. This versatility has made it a common tool throughout Mandalorian society. Its construction from Mandalorian Iron, reinforced with Durasteel Bonding, also provides excellent resistance to wear, impact damage, and edge degradation, ensuring long-term reliability.

Easy to Carry and Conceal - At only 400 grams and 45 centimeters in overall length, the weapon is lightweight enough for everyday wear and can be comfortably carried as a backup weapon without significantly burdening the wielder.

Superior Close-Quarters Performance - As a tanto-inspired Kal that borders on being a short word, the Vheh'Tome excels in confined spaces where larger weapons become difficult to maneuver. Its compact profile allows for rapid deployment and effective use in tight corridors, vehicles, and structures, while the curved blade geometry naturally favors slicing and draw-cuts; combined with the monomolecular edge and mullinine-neutronium enhancements, the weapon can inflict severe lacerations with minimal effort.

Cultural Companion Weapon - The Vheh'Tome is frequently paired with the Vhett'Tome Beskad, allowing users to carry a complementary secondary blade that shares similar handling characteristics while providing additional versatility.

​

WEAKNESSES

Very Limited Reach - Despite being larger than many traditional daggers, the Vheh'Tome remains significantly shorter than swords, beskads, and polearms, forcing users to close distance against longer weapons. To exploit its strengths, the wielder must often enter an opponent's immediate striking range, increasing personal risk during combat.

Unprotected Hilt - Unlike the Vhett'Tome Beskad, the Vheh'Tome lacks a tsuba or other protective hand guard. This leaves the wielder's hand vulnerable during blade engagements, parries, and weapon binds. While its short length makes defensive actions against larger weapons more difficult, particularly when facing trained swordsmen.

Not Optimized for Dedicated Combat - While deadly in skilled hands, the Vheh'Tome's utility-focused design means it lacks some of the specialized combat advantages found in purpose-built military sidearms or larger battlefield weapons.

Curved Blade Limits Thrust Efficiency - The blade's curved profile favors slashing attacks but is less effective at straight-line penetration than dedicated thrusting daggers such as the Aliik Kal Vibrodagger.

​

DESCRIPTION

The Vheh'Tome Kal is a tanto-inspired interpretation of the traditional Mandalorian Kal Dagger, blending the practicality of a utility knife with the lethality expected of a Mandalorian weapon. Manufactured by the Aether Arms Division for the exclusive use of the Mandalorian Empire, though it is officially classified as a dagger, its dimensions place it near the boundary of a short sword, granting it greater reach and versatility than many conventional sidearms while remaining compact enough for constant everyday carry. Forged from Mandalorian Iron and strengthened through Durasteel Bonding, the Vheh'Tome is designed to withstand years of use in both civilian and military settings. Its curved single-edged blade features a monomolecular cutting edge, further enhanced by mullinine and neutronium treatments, granting extraordinary sharpness, exceptional edge retention, and impressive durability. While the blade's curvature favors slashing and cutting attacks, the forward-balanced Agrinium grip provides excellent point control and allows the weapon to deliver surprisingly deep thrusts when required. Unlike the Vhett'Tome Beskad, the Vheh'Tome does not incorporate a protective tsuba-style guard. This omission reduces weight and bulk, improving portability and making the weapon more practical for daily use. The blade is typically carried in a scabbard that ranges from simple working designs to ornate family heirlooms, reflecting both the weapon's utility and its cultural significance. It is common to see these scabbards embellished with the wielder's Clan Sigil or other important markings reflective of the user. Among Mandalorians, the Vheh'Tome is often paired with the Vhett'Tome Beskad, as their complementary names and designs have long been associated with the two weapons, with many warriors carrying the Vheh'Tome as a backup blade alongside its larger counterpart. Outside of military use, the weapon enjoys widespread popularity as a self-defense tool, particularly among women, children, travelers, and settlers. Its combination of utility, reliability, and effectiveness has made it one of the most commonly carried blades in Mandalorian society, equally at home on the battlefield, in the workshop, or around the family table.

 

[Amelia von Sorenn]

ALIIK KAL VIBRODAGGER​

OUT-OF-CHARACTER INFORMATION

Intent

Misericorde-style traditional Mandalorian Dagger for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Kal Dagger
	Vibroknife
Primary Link(s)	Alii'gai Beskad
	Misericorde

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Mandalorian Empire
Model	Aliik
Modularity	No
Market-Status	Closed-Market
Production	Mass-Produced

Materials

Blade Composition	Hilt Composition	Additional
Mandalorian Iron	Mandalorian Iron	Obsidian
Durasteel	Neuranium	Bronzium
Vandinite	Plastoid	Melee Weapon Components

TECHNICAL INFORMATION

Classification	Vibrodagger
Size	Small
Weight	Light

ADDITIONAL INFORMATION

Average Mass	370 Grams
Total Length	46 Centimeters
Blade Length	33 Centimeters
Grip Length	13 Centimeters
Blade Type	Spear Point Blade
Hilt Type	Unprotected Hilt

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Neutronium Edge Hilt Components Hilt Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Enhanced Energy Cell Durasteel Bonding Self-Sharpening Sheath

STRENGTHS

Devastating Penetration - The Aliik's spear-point blade profile, forward-balanced Agrinium grip, and lightweight construction concentrate force into thrusts, allowing the dagger to inflict deep penetrating wounds and exploit weak points in armor. While the integrated ultrasonic generator causes the blade to vibrate at extreme frequencies, significantly increasing cutting and piercing effectiveness, even shallow strikes can produce disproportionately severe tissue damage.

Durable Construction - Mandalorian Iron, constructed and combined with Durasteel Bonding, grants the weapon substantial resistance to wear, edge degradation, and battlefield abuse despite its relatively small size. Mullinine treatment and the self-sharpening sheath further ensure that the blade remains combat-ready with minimal maintenance, preserving its effectiveness over extended deployments.

Stable Power Delivery - The enhanced energy cell smooths power flow to the ultrasonic generator, reducing vibration irregularities and making the weapon more predictable than many standard vibroblades.

Fast and Agile Handling - At only 370 grams, the Aliik is exceptionally quick in the hand. Its light weight allows rapid directional changes, swift follow-up attacks, and effective use as an off-hand companion weapon alongside a Beskad.

​

WEAKNESSES

Extremely Limited Reach - With a total length of only 46 centimeters, the Aliik requires the wielder to enter dangerously close quarters to be effective, placing them at a disadvantage against swords, polearms, and ranged weapons. The dagger excels in close combat but offers little versatility beyond grappling distance, making positioning and timing critical to its successful use.

Poor Defensive Capability - The unprotected hilt offers virtually no protection for the user's hand during parries, binds, or close-quarters weapon clashes, increasing the risk of injury.

Specialized for Thrusting - While highly effective at piercing, the narrow misericorde-inspired blade is less efficient at delivering broad slashing wounds than larger knives or swords. The weapon is most effective against armor gaps, joints, and vulnerable anatomy, while inexperienced users struggle to exploit its strengths compared to more forgiving melee weapons.

Dependent on Power Supply - The ultrasonic generator relies on the vibration cell and energy system. While the blade remains functional as a dagger without power, a significant portion of its offensive capability is lost if the system is depleted or damaged.

​

DESCRIPTION

The Aliik Kal Vibrodagger is a modernized interpretation of the traditional Mandalorian Kal, a lightweight, double-edged dagger historically carried as a companion weapon to the Beskad. Manufactured by Aether Arms Division for the exclusive use of the Mandalorian Empire, it is designed in the style of an ancient misericorde, retaining the classic spear-point profile favored by Mandalorian Warriors for precision thrusting and close-quarters lethality. Traditionally wielded in the off-hand while a Beskad occupied the dominant hand, the Aliik Kal remains a favored secondary weapon among warriors who value speed, control, and deadly efficiency. Constructed from Mandalorian Iron and reinforced through Durasteel Bonding, the dagger offers durability far beyond what its compact size might suggest. Its double-edged blade incorporates a monomolecular edge enhanced with both mullinine and neutronium treatments, granting exceptional sharpness, outstanding edge retention, and remarkable structural resilience. The lightweight Agrinium grip shifts the weapon's balance toward the blade, maximizing thrusting power and enabling deep-penetrating strikes that exploit even small vulnerabilities in an opponent's defenses. The Aliik Kal's greatest innovation lies in its integrated ultrasonic generator. Powered by a dedicated vibration cell and regulated by an enhanced energy cell, the blade vibrates thousands of microscopic times per second, dramatically increasing the damage inflicted by both cuts and thrusts. This technology transforms the dagger from a simple sidearm into a highly lethal close-combat weapon capable of inflicting catastrophic injuries disproportionate to its size. Issued with a self-sharpening sheath that continuously maintains the blade's edge while holstered, the Aliik Kal Vibrodagger requires minimal upkeep and remains ready for combat at a moment's notice. Though its limited reach, unprotected hilt, and dependence on close-range engagement restrict its versatility, the weapon excels in the role for which it was designed - a swift, precise, and brutally effective companion to the Mandalorian Beskad.

 

[Amelia von Sorenn]

VK-12 COMBAT VIBROKNIFE​

OUT-OF-CHARACTER INFORMATION

Intent

Standard-issued Military Combat Knife for the Open Market

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Virboknife
	M8 Combat Knife
	N-30 Battle Knife
Primary Link(s)	Combat Knife

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Aether Arms Division
Model	VK-12
Modularity	No
Market-Status	Open-Market
Production	Mass-Produced

Materials

Blade Composition	Hilt Composition	Additional
Rhodium	Rhodium	Bronzium
Vandinite	Neuranium	Plastoid
Manganese Brass	Durite	Melee Weapon Components

TECHNICAL INFORMATION

Classification	Combat Knife
Size	Small
Weight	Light

ADDITIONAL INFORMATION

Average Mass	330 Grams
Total Length	30 Centimeters
Blade Length	17 Centimeters
Grip Length	13 Centimeters
Blade Type	Single-Edged Chisel-Point
Hilt Type	Finger-grip Hilt

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Contoured Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Self-Sharpening Sheath

STRENGTHS

Outstanding Edge Performance - The single-edged chisel-point blade is optimized for piercing and armor-gap attacks. Combined with the monomolecular edge, quadranium enhancement, and neutronium reinforcement, the VK-12 is capable of delivering deep, highly damaging thrusts relative to its size. The monomolecular edge provides extraordinary sharpness, while the neutronium further enhances durability, allowing the edge to remain lethal even after prolonged use.

Enhanced Vibroblade Damage - The integrated ultrasonic generator causes the blade to vibrate at extreme frequencies, dramatically increasing cutting and puncturing effectiveness. Even brief contact can result in severe wounds compared to conventional combat knives. The enhanced energy cell regulates the vibration system, reducing power fluctuations and providing more consistent performance than many standard vibroknives.

Secure Weapon Retention - The finger-grip hilt helps prevent the wielder's hand from slipping forward during aggressive thrusts, improving safety and weapon control during close-quarters combat.

Durable Construction - Durasteel Bonding significantly improves resistance to wear, impact damage, and long-term degradation, allowing the VK-12 to withstand extensive field use. The self-sharpening sheath continually maintains the blade's edge while the weapon is holstered, reducing upkeep and ensuring the weapon remains combat-ready.

​

WEAKNESSES

Extremely Short Reach - With a total length of only 30 centimeters, the VK-12 requires the user to enter immediate striking distances, placing them at a disadvantage against swords, polearms, and most dedicated melee weapons.

Reduced Striking Power - While the contoured grip improves accuracy, it sacrifices leverage. The weapon excels at precision attacks but transfers less force than larger knives or combat blades designed around power generation, and while the chisel-point blade is highly specialized for thrusting and controlled cuts, it offers fewer offensive options than double-edged combat knives in certain fighting styles.

Limited Defensive Capability - The finger-grip hilt improves retention but provides only modest hand protection compared to larger guards, basket hilts, or knuckle bows.

Poor Crowd-Control Potential - Its compact dimensions make it highly effective against individual targets but ill-suited to controlling space or engaging multiple opponents simultaneously.

Requires Precision to Maximize Effectiveness - the VK-12 achieves its greatest performance when targeting weak points and vulnerable areas. Less-skilled users may struggle to fully exploit the weapon's advanced edge technologies.

​

DESCRIPTION

The VK-12 Vibroknife is a mass-produced military combat blade designed and manufactured by Aether Arms Division to provide soldiers, security personnel, bounty hunters, and private citizens with a dependable close-quarters weapon. Compact, lightweight, and brutally efficient, the VK-12 emphasizes precision, penetration, and reliability over raw striking power, making it an ideal backup weapon for situations where larger arms are impractical. Its single-edged chisel-point blade is engineered for thrusting and controlled cutting attacks. Constructed from durable alloys and reinforced through Durasteel Bonding, the blade incorporates a monomolecular cutting edge enhanced with both quadranium and neutronium. This combination grants exceptional sharpness, improved penetration characteristics, and remarkable resistance to wear and damage. The resulting weapon can inflict severe wounds while maintaining its combat effectiveness over prolonged service. The VK-12's ergonomically designed contoured grip promotes precise blade placement and comfortable handling, while the integrated finger-grip hilt helps prevent the user's hand from sliding forward during powerful thrusts. This design philosophy prioritizes control and accuracy, allowing the weapon to excel in closer-quarters engagements where precise strikes are often more important than brute force. At the heart of the weapon is an ultrasonic generator powered by a dedicated vibration cell and stabilized through an enhanced energy cell. When activated, the blade vibrates thousands of microscopic times per second, exponentially increasing the destructive potential of each strike. The enhanced power regulation system minimizes erratic vibration behavior, ensuring predictable and consistent performance under combat conditions. Issued with a self-sharpening sheath that continuously maintains the blade's edge while holstered, the VK-12 requires minimal maintenance and remains ready for immediate deployment. Though limited by its short reach and reliance on close-range combat, the VK-12 Vibroknife remains a highly effective combat tool whose precision, durability, and vibroblade technology have made it a popular choice throughout the galaxy.

 

[Amelia von Sorenn]

SURVIVAL KNIFE​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass	680 Grams
Total Length	46 Centimeters
Blade Length	30 Centimeters
Grip Length	16 Centimeters
Blade Type	Clip-point
Hilt Type	Crossguard Hilt

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

RESCUE AXE​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass
Total Length
Blade Length
Grip Length
Blade Type
Hilt Type

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

VARIANT HAND AXE​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass
Total Length
Blade Length
Grip Length
Blade Type
Hilt Type

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

VARIANT BESKAD​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass
Total Length
Blade Length
Grip Length
Blade Type
Hilt Type

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

MANDALORIAN AXE​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass
Total Length
Blade Length
Grip Length
Blade Type
Hilt Type

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

MANDALORIAN HAMMER​

OUT-OF-CHARACTER INFORMATION

Intent

Melee Weapon for insert name here

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Not Applicable
Primary Link(s)	Not Applicable

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation
Model
Modularity
Market-Status
Production

Materials

Blade Composition	Hilt Composition	Additional
		Melee Weapon Components

TECHNICAL INFORMATION

Classification
Size
Weight

ADDITIONAL INFORMATION

Average Mass
Total Length
Blade Length
Grip Length
Blade Type
Hilt Type

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Devaronian Edge Ionite Edge Quadranium Edge Neutronium Edge Hilt Components Hilt Guard Zabrak Grip Contoured Grip Agrinium Grip Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding Stun Pulse Self-Sharpening Sheath Scabbard

STRENGTHS

​

WEAKNESSES

​

DESCRIPTION

 

[Amelia von Sorenn]

MUNIT'KAD HALBERD​

OUT-OF-CHARACTER INFORMATION

Intent

Updated variant of the Mandalorian Execution Vibro-Ax for use by the Mandalorian Empire

Image Source	[HERE]
Permission(s)	Not Applicable
Canon Link(s)	Munit'kad Halberd
	Ap'lek's Mandalorian Executioner Vibro-Ax
Primary Link(s)	Halberd

PRODUCTION INFORMATION

Manufacturer	Aether Arms Division
Affiliation	Mandalorian Empire
Model	Munit'kad
Modularity	No
Market-Status	Closed-Market
Production	Minor

Materials

Blade Composition	Haft Composition	Additional
Mandalorian Iron	Mandalorian Iron	Aurodium
Durasteel	Neuranium	Dactillion-Leather
Vandinite	Rhodium	Melee Weapon Components

TECHNICAL INFORMATION

Classification	Polearm
Size	Very Large
Weight	Heavy

ADDITIONAL INFORMATION

Average Mass	2.8 Kilograms
Total Length	2.25 Meters
Blade Length	60 Centimeters
Haft Length	2.25 Meters
Blade Type	Singled-Edged Crescent-shaped
Haft Type	Unprotected Haft

SPECIAL FEATURES

Blade Components Edge Mono-molecular Edge Mullinine Edge Neutronium Edge Haft Components Staff Agrinium Grip Vibro-insulator Plates Miscellaneous Ultrasonic Generator Vibration Cell Energy Cell Enhanced Energy Cell Durasteel Bonding

STRENGTHS

Exceptional Reach and Area Control - With a seven-foot haft and a large crescent-shaped blade, the Munit'kad excels at controlling space on the battlefield. It allows the wielder to engage opponents well outside the range of swords, axes, and knives, while threatening multiple attack angles through sweeping strikes.

Devastating Vibro-Enhanced Strikes - The integrated ultrasonic generator causes the blade to vibrate at extreme speeds, dramatically increasing cutting efficiency and tissue damage. Even glancing blows can become serious wounds, while committed strikes can be catastrophic.

Superior Cutting Power - The monomolecular edge combined with neutronium reinforcement produces an extraordinarily keen and durable cutting surface. The crescent-shaped blade geometry further enhances chopping and cleaving performance, making the weapon highly effective against both armored and unarmored targets.

Forward-Balanced Impact - Agrinium grip components reduce unnecessary weight along the haft, shifting the balance toward the blade. This enhances momentum during swings, allowing the wielder to deliver exceptionally powerful cuts that deeply penetrate targets.

Safe Grip Identification - Vibro-insulator plates protect the haft from harmful vibration transfer. Their Dactillion-leather coverings and distinctive aurodium rings allow the wielder to quickly identify safe hand-placement zones even in darkness, mud, smoke, or adverse weather conditions.

Enhanced Reliability - Durasteel bonding strengthens the blade assembly and improves resistance to wear, battlefield abuse, and long-term degradation. The weapon is designed to withstand repeated heavy impacts without significant loss of effectiveness.

​

WEAKNESSES

Poor Performance in Tight Spaces - The weapon's length is a tremendous advantage in open terrain; however, it becomes a liability inside starships, corridors, buildings, trenches, or dense vegetation where full swings and respositioning are restricted.

Heavy and Fatiguing - Despite the Agrinium-assisted balancing, the Munit'kad remains a large and heavy polearm. Extended use can exhaust the wielder more quickly than shorter weapons, particularly during prolonged melee engagements.

Vulnerable at Close Range - Opponents who move within the weapon's effective range can significantly reduce its effectiveness. Once engaged at grappling distance, the Munit'kad becomes cumbersome compared to knives, pistols, or short swords.

Requires Specialized Training - Effective use demands mastery of polearm techniques, spacing, footwork, and leverage. Inexperienced users may struggle to exploit its reach advantages or recover quickly after missed attacks.

Power Dependency - Although still a functional polearm when unpowered, the weapon loses much of its destructive potential if the vibration cell is depleted or the ultrasonic generator is damaged.

Limited Concealability - At over two meters in length, the Munit'kad cannot be discreetly carried and is immediately recognizable as a dedicated battlefield weapon, making it unsuitable for covert operations.

Momentum Commitment - The blade's forward-weighted balance enhances striking force but also increases recovery time after powerful swings. Skilled opponents may exploit missed attacks or overextensions.

​

DESCRIPTION

The Munit'kad Halberd, often referred to as the Mandalorian Executioner's Vibro-Ax, is a modernized interpretation of a feared Mandalorian polearm traditionally associated with battlefield shock troops, honor guards, and executioners. Designed and manufactured by the Aether Arms Division, the weapon is built around a seven-foot haft and a massive single-edged crescent blade, and is designed to dominate melee engagements through reach, power, and intimidation. Forged from Mandalorian Iron and strengthened through Durasteel Bonding, its blade incorporates a monomolecular edge reinforced with neutronium, producing an exceptionally sharp and resilient cutting surface capable of inflicting devastating wounds. An ultrasonic generator further enhances lethality by vibrating the blade at extremely high frequencies, while a vibration cell and an enhanced energy cell ensure consistent, reliable performance during combat operations. The Munit'kad's Agrinium grip components shift the weapon's balance toward the head, maximizing striking momentum and allowing tremendous force to be delivered through sweeping cuts and execution-style blows. To protect both the weapon and its wielder, specialized vibro-insulator plates are installed along the haft. These plates are wrapped in Dactillion leather and marked with aurodium rings, enabling rapid identification of safe gripping positions regardless of lighting conditions or battlefield contamination. However, the weapon is difficult to handle, requiring specialized training to take full advantage of its reach and quickly recover after missed attacks, which opponents may exploit given its recovery time. While cumbersome in confined environments and the inability to be discreetly carried, the Munit'kad remains a terrifying weapon in open combat. Its combination of reach, cutting power, and vibro-enhanced lethality makes it one of the most formidable polearms available to Mandalorian warriors, embodying both their martial traditions and their relentless pursuit of battlefield superiority.