Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Status
Not open for further replies.
BrHVcgN.png

Heavy Dual Barrel Turret - Reserve Container to Rear of Turret​
K5aezkU.png

  • Intent: Create a mass produced, open market Turbolaser.
  • Image Source:
    • Source
    • Headers/Dividers made by me.
  • Canon Link: Source
  • Permissions:
  • Primary Source: N/A
M4KNVCh.png

dHmKeLd.png

  • Classification: Turbolaser
  • Size:
    • Average (Light)
    • Average (Medium)
    • Large (Heavy)
  • Weight:
    • Light (Light)
    • Average (Medium)
    • Heavy (Heavy)
  • Ammunition Type: Normal Grade Ethaerium
  • Ammunition Capacity:
    • Low (Light)
    • Low (Medium)
    • Low (Heavy)
  • Effective Range:
    • Average (Light)
    • Long Range (Medium)
    • Battlefield (Heavy)
  • Rate of Fire:
    • Low (Light)
    • Low (Medium)
    • Low (Heavy)
  • Damage Output:
    • High (Light)
    • Very High (Medium)
    • Extreme (Heavy)
  • Recoil:
    • Average (Light)
    • High (Medium)
    • High (Heavy)
1HNoRpA.png

4jxDbOf.png

+ Ethaerium Enriched + Use of Normal Grade Ethaerium Gas even in the through the firing process helps give this iteration Turbolaser a hefty punch above the standard starship turbolaser even in the Light classification. Additional internal systems in the Medium and Heavy variants provide more cohesive bolts for added punch.
+ Tracking Targets + The Light Variant of this system makes for capable defensive weaponry given the ease the turret is able to rotate and track.
+ Reach + The range on this weapon system grows with each step jump in classification by means of additional internal systems to provide additional bolt cohesion across longer range.

WUZlVG1.png

- Ethaerium Infused - Due to the use of Ethaerium Gas for the firing process, should a turret be destroyed, there is a high chance that the Ethaerium gas inside the turret and feed line will retroactive explode. With potential for further damage than simply just the turret being affected.
- At A Clip - The Infusion of Ethaerium into the firing process requires a careful metering to remove the chance for catastrophic failures. Drawing from the reserve and into dedicated staging containers rather than allowing for a continuous flow is the stop gap taken to prevent said failure. It does not remove the danger as it can ignite the whole line during the refueling process.
- Sluggish - While the damage output of this system is nothing to shy away from, the immense draw for power and Ethaerium infusion drag the rate of fire down.

WZQLvxP.png

A simple design, the expansion of the Priddy catalog would not be complete without a delve into the turbolaser section. Using a variety of turbolaser turrets as a point of reference for the design, the focus was to keep the damage output as high as possible while bringing the weapon system as a whole down to scaling levels. While the objective was achieved, there was a strange balance between rate of fire and ammunition capacity that they had not expected to achieve. While not comparable to dedicated military designs, the need to draw reserve gas into the sealed staging containers was paired with the rather relaxed rate of fire. A tradeoff given that the system would not regularly cease firing to refuel aside from a potential loss of a container.

It does present a potential danger should the containers be damaged, especially during a refuel process.

Another bonus given the scaling procedures was the added internal systems with each jump. Aside from a slight uptick in bolt output, it also provided far better magnetic shielding and extended the range as the weapon scaled up.


•Changed Submission Name.
•Changed Submission Image.
•Added description below the image.
•Edited Intent description.
•Added new image source.
•Edited Image Source to include Headers/Dividers Source.
•Edited Canon Link Source to more appropriately represent the submission.
•Added Permission for Ethaerium for use in Submission.
•Edited Format of manufacturing list.
•Edited Affiliation list.
•Changed Market Status from Closed-Market to Open-Market.
•Edited Model description to better represent the submission.
•Edited Modularity to represent use on appropriately sized starships.
•Edited Classification from Heavy Turbolaser to Turbolaser.
•Edited Size Ratings to reflect use on appropriately sized starships.
•Edited Weight Ratings to reflect use on appropriately sized starships.
•Edited Ammunition Capacity Ratings to reflect use on appropriately sized starships.
•Edited Effective Range Ratings to reflect use on appropriately sized starships.
•Edited Rate of Fire Ratings to reflect use on appropriately sized starships.
•Edited Damage Output Ratings to reflect use on appropriately sized starships.
•Edited Recoil Ratings to reflect use on appropriately sized starships.
•Reworked Strengths and Weaknesses to reflect changes in Ammunition.
•Added a Strength.
•Added a Weakness.
•Removed Agrocite Enhancements from the Special Features List/Submission.
•Removed Dedicated Auxiliary Reactor from the Special Features List/Submission.
•Edited Description to better explain/represent submission.
 
Last edited:

Ravenfire

King of Pumpkins
Moderator
FACTORY MODIFICATION TEMPLATE
Submission Name: Priddy Bellicose Class Frigate
Link to Submission: Link
Reason for Factory Modification Request: Update systems and balance rework.

FACTORY MODIFICATION TEMPLATE
Submission Name: Priddy Bijou-class Pocket Carrier
Link to Submission: Link
Reason for Factory Modification Request: Update systems and balance rework.

FACTORY MODIFICATION TEMPLATE
Submission Name: ES92 Priddy Nebulon S-Class Cruiser
Link to Submission: Link
Reason for Factory Modification Request: Update systems and balance rework.

FACTORY MODIFICATION TEMPLATE
Submission Name: Priddy Heavy Turbolaser
Link to Submission: Link
Reason for Factory Modification Request: Update and balance rework.

FACTORY MODIFICATION TEMPLATE
Submission Name: Priddy Bomblet Generator
Link to Submission: Link
Reason for Factory Modification Request: Update and balance rework.
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom