Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Hekler'Kok Polymer Cartridge Ammunition-Standard

Status
Not open for further replies.

Noah Corek

Cocked, Locked and a Smoking Barrel
Factory Judge
TrueVelocityAmmo.jpg

OUT OF CHARACTER INFORMATION
  • Intent: To create a new flagship product that Hekler'kok can market as a improvement to traditional slugthrower technology
  • Image Source: Here
  • Canon Link: N/A
  • Permissions: N/A
  • Primary Source: N/A
PRODUCTION INFORMATION
  • Manufacturer: Hekler'Kok Defense Industries
  • Affiliation: Open-Market
  • Model: Hekler'Kok Polymer Cased Ammunition-Standard
  • Modularity: Comes in a variety of cartridges
  • Production: Mass-Produced
  • Material: Heat-Resistant Polymer (Cartridge), Durasteel (Cartridge Rim and Bullet Jacketing), Lead (Bullet Core), Primer and Gunpowder
SPECIAL FEATURES
  • Various Cartridges:
  • Pistol Cartridges:
    • 5.7x28mm
    • 7.62x25mm
    • 9x19mm
    • 9x39mm (.357 Magnum)
    • 10x22mm (.40 S&W)
    • 10.9x33mm (.44 Magnum)
    • 11.43x23mm (.45 ACP)
    • 12.7x33mm (.50 AE)
  • Rifle Cartridges:
    • 5.45x39mm
    • 5.56x45mm
    • 6.8x49mm
    • 7.62x35mm (.300 Blackout)
    • 7.62x39mm
    • 7.62x51mm
    • 7.62x63mm (.30-06 Springfield)
    • 7.62x67mm (.300 Winchester Magnum)
    • 8.58x69mm (.338 Lapua Magnum)
    • 10.36x77mm (.408 CheyTac)
    • 11.63x43mm (.458 SOCOM)
    • 12.7x99mm (.50 BMG)
    • 14.5x114mm
STRENGTHS
  • Lightweight: Due to it being constructed out of polymer rather than a traditional brass cartridge it ways about fifty percent less than a traditional cartridge
  • Cheap: Since the cartridge is constructed out of polymer rather than a traditional brass cartridge it cost about twenty-five percent less to produced than a tradition cartridge
  • Suppressable: Unlike most conventional blasters it is actually rather simple to suppress the noise emitted by slugs and slugthrowers
  • Less Heat: Due to the mechanics of polymer cases the heat is directed towards the barrel rather than the action, causing less wear and tear on the weapon
  • Universal: The ammunition is not limited to Hekler'Kok slugthrowers and can fired from any as long as they can chamber the proper caliber
WEAKNESSES
  • Loud: On the other hand when the slugthrower is not suppressed it will make a decent amount more noise than your conventional blaster
  • Not a Space Saver: Unlike blaster packs slugs are larger and will take up more space
  • Not a Weight Saver: Slugs weigh more than blaster packs and will take up more weight
DESCRIPTION
In order to give Hekler'Kok a new lease on life and to try and bring more people into the slugthrower market the company looked into various products that could do this. After a few months of research they finally settled on polymer-cased ammunition produce in a massive number of different calibers.

Like any Hekler'Kok design they started with the materials needed to produce the product first. The biggest concern was the type of polymer used but after some debate they settled on a rather simple heat resistant polymer that would stand up to the heat produced by a slugthrower. Initially the entire cartridge was polymer but during testing the polymer cartridge rim would often bend upon extraction and jam and was replaced with a simple durasteel rim. The designers went with Occam's Razor for the gunpowder and primer and went with your standard slugthrower materials. Finally they decided, after some lengthy debate, that the bullets would be a standard jacketed bullet with a durasteel jacket and lead core.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom