Approved Tech PGEM/CB-001

[Niki Priddy]

Spoiler: Blaster Bolt Example

Standard Blaster Bolt

Dampened Blaster Bolt

• Intent: Create a mass produced, open market concealed blaster.
• Image Source: Source
• Canon Link: Source
• Permissions: N/A
• Primary Source: N/A

• Manufacturer: Niki Priddy, Terminus Rêve, Priddy General Engineering And Manufacturing
• Affiliation: Niki Priddy, Anyone
• Market Status: Open-Market
• Model: Priddy General Engineering And Manufacturing / Concealed Blaster - 001
• Modularity: Low without customization - Grip swap, scope swap, trigger swap, with included tool out of the box.
  
• Production: Mass-Produced
• Material:
  • Dallorian Alloy
  • Durasteel
  • Agrinium
  • Rubber
  • Dedlanite
  • Myoflex
  • Blaster Pistol Components

• Classification: Concealed Blaster
• Size: Very Small
  • LxH - 13.3cmx12.43cm
• Weight: Average
  • 0.68 kg
• Ammunition Type: Tibanna Gas Cartridge / Power Cell Combination
• Ammunition Capacity: Very Small
  • 16 Shot Capacity
• Effective Range: Personal
  • 18.3 Meters Accurate
• Rate of Fire: Average
  • Mechanical RoF - 240 RPM/4 RPS
• Damage Output: High
  • Bolt Velocity 701 m/s
• Recoil: Average

• Cautionary Pulsar
• Mandalorian Blaster Chamber
• Power Setting Selector
  • Standard (Lethal and Stun)
  • Dedicated Stun (Non-Lethal)
• Electronic Safety
• Heavy Blaster Actuating Module
• Galven Pattern Damping Sleeve
• Overcharged Galven Circuitry
• Energy Dampener
• Built-in Blaster Sight - Reduced Visible Spectrum
• Prismatic Crystal Focusing System / Prismatic Crystal Housing
• Magnatomic Adhesion Grips, weighted non-conductive stock
• Targeting Computer / Computerized Interface Scope
  • Interfacing, Uplink, and Networking Capability
    • Pyrowall and Echo Pulse
  • Holographic HUD Display and Manual Targeting Reticule (In Event of Jamming)
  • Target Imaging System
  • Thermal, Infrared, Low Light, and Ultraviolet Imaging System
  • Variable Zoom (1-6x)
  • Rangefinder
  • Anti-Light Reflection Lens Coating

• Punchy - Using a Mandalorian Blaster Chamber in tandem with a Heavy Actuation Module, the blaster packs a wallop for its size.
• Size - The blaster itself is barely longer or taller than ones hand. Even with the scope mounted on either side of the top rail, it is still an easily concealed weapon.
  
• Slap and Zap - The Mandalorian Blaster Chamber grants the bolts in Standard Setting both Lethal and Stun capabilities in the same shot. The standard setting bolt is only powerful enough to disorient the recipient rather than fully Stun.
• Seeing it Right - The use of an energy dampener weakens the bolts from their true potential, but also makes the bolts less noticeable.

• Close Engagement - This variety of blaster is not meant for anything more than close range engagement. Even the scope has a limited zoom to remind the user of such as anything beyond the suggested range is wildly inaccurate due to shortened barrel length.
• Limited Clip - Using specific modules during the design, the amount of ammunition available is limited. The heightened output of the blaster bolt being on the criteria more so than ammunition capacity.
• Still Visible - Still Audible - Even with the energy dampener present, the blaster bolts are still audible and visible to a degree as the dampener does little more than mitigate some of the more obnoxious elements.
• Visible Built-in Sight - Even with the energy dampener present, making the blaster energy less noticeable, the hair line guide of the built in sight is still just that. Visible to the naked eye, and can alert its intended target of intent.

With the success of the Particle Blaster Pistol, and Mandalorian designs on hand, an endeavor was made to make a concealed blaster pistol for the larger market. While powerful, the limitations start to show when put through continuous use.

Sighting an easy to replace cartridge system integrated into the hand weld, the replacement of spent cells mitigated the lack of ammunition capacity. Alongside this was the surprisingly hindered fire speed compared to earlier productions of blaster weapons.

Taken with a grain of salt given the few melted barrel assemblies and volatile reactions achieved attempting to push the weapon beyond that limit.

An unusual addition was the inclusion of an energy dampener inside the blaster. Markedly dimming the outward bolt emissions and even dimming the bolt projectile in flight. While not see through, the blaster bolt does not emit a large flash upon exiting the barrel or mid-flight as a standard blaster bolt.

Even seeming to compress the light radiation to a degree and thus thinning out the bolt in flight to the naked eye.

Another addition was built into the trigger assembly. With a half pull being held, a thin line of blaster energy is projected as a rudimentary line of sight aiming system. While not an ideal inclusion for those with nefarious ideas, it does make for a decent training tool in Niki's opinion.

To ensure the best results with limited rounds, a simple rail and scope mount system was devised to be implemented while still maintaining rudimentary iron sights. Utilizing the rail as an integrated system for the scope decentralized some of the features, making it easier to swap one scope for another without losing features.

Achieving this, the design was put through final trials before being approved for production.

 

[MANIAC]

Niki Priddy

Nice one!

Approved.