Approved Tech OHBR-1

[Noah Corek]

Image Source: http://fc09.deviantart.net/fs71/f/2013/172/8/f/fordorsia_hmg_mk_3_a2_by_airborneleaf-d6a0v60.png
Intent: To create a weapon that can be mounted as everything from a AA to a co-axial weapon to a mobile crew served weapon
Development Thread: N/A
Manufacturer:
Model: Omega Heavy Blaster Repeater-1
Affiliation: Omega Protectorate
Modularity: Yes (Interchangeable Barrels. Optics, it can even be mounted on a tripod with wheels for easy moving, though this add a extra three kilograms to the tripod weight)
Production: Mass-Produced
Material: Alusteel-Tungsten Alloy
Classification: Blasterl
Size: Stationary and Mounted
Length: 168.2 Centimeters
Weight: 12.7 Kilograms (Without Tripod) 21.3 Kilograms (With Tripod)
Ammunition Type: Gas Canister and Power Cell
Ammunition Capacity: 10,000 (Gas Canister) 2,500 (Power Cell)
Effective Range: 1750 Meters
Rate of Fire: Fully Automatic (650 Bolts a Minute)
Special Features:

• Built-In Flip Up Circle Reticle Sight
• Quick Change Barrels
• Heat Sink

Description: The development of the OHBR-1 was due in part for the need of a single weapon that could me mounted in fortifactions, vehicles and even aircraft. It actually is highly based off of the E-Web heavy blaster repeater, but taking the design and tweaking it a bit more. First thing first, the clunk cooling unit that usually had to be carried around with the E-Web was replaced, this was done by making the OHBR-1 with highly heat resistant materials, a alusteel-tungsten alloy, this allows to the weapon to be more mobile, being able to be moved by only two people instead of the usual three of four it would take. Along with this, it still has the same power as the E-Web and higher range. A heat sink at the beginning of the barrel also helps with dissapating heat.

Strengths:

• High Stopping Power
• Long Range

Weaknesses:

• Heavy
• Can't be fired hand-held

 

[Hailyn]

Under Review.

 

[Hailyn]

I know I mentioned this in a PM, but please try to remember that there is a rule for a maximum of 3 submissions per writer per factory section.
[member="Noah Corek"]

 

[Hailyn]

Marked for archival, if you wish to bring this out once your other 3 submissions have been completed you may second chance this.

 

[Allyson Locke]

[member="Noah Corek"] Opened from Second Chance please let a judge know when you're ready.

 

[Noah Corek]

[member="Silara Vantai"]
Done.

 

[Popo]

[member="Noah Corek"]
After double checking, I'll be handling this one. Under review.

 

[Popo]

[member="Noah Corek"]
Better heat resistant materials help out a lot, but that doesn't remove the problem. All it does it place the threshold higher. Is there anything on the weapon that compensates for heat?

 

[Noah Corek]

[member="Popo"]
Done.

 

[Popo]

[member="Noah Corek"]
Looks pretty standard, heat's taken care of... Not much else I'm seeing here. Approved pending secondary.

 

[Allyson Locke]

Approved.