Darth Strelok
Intent: To create an experimental weapon for The Knights Obsidian.
Image Source: https://commons.m.wikimedia.org/wiki/File:EM-1_%22Thorpe%22_Rifle,_Prototype_.280_cal.jpg#mw-jump-to-license
Canon Link: http://starwars.wikia.com/wiki/Nightstinger_sporting_blaster_rifle
http://starwars.wikia.com/wiki/DC-19_%22Stealth%22_carbine
http://starwars.wikia.com/wiki/Light_absorbing_cell
http://starwars.wikia.com/wiki/Disruptor_rifle
Primary Source: Disruptor Rifle
PRODUCTION INFORMATION
Manufacturer: Maple Harte
Affiliation: Closed Market (Knights Obsidian and Maple Harte only)
Model: EM-1 Experimental Rifle, British Military.
Modularity: No
Production: Semi-Unique
Material: Durasteel, Disruptor components, Light Absorbing Cells
TECHNICAL SPECIFICATIONS
Classification: Stealth Laser Disruptor
Size: Average
Weight: Heavy
Ammunition Type: Power cell, gas canister
Ammunition Capacity: 3 (Power Cell) 12 (Gas Canister), 1 (Stealth Setting)
Reload Speed: Low
Effective Range: Low (Two Hundred Meters.)
Rate of Fire: Very Low
Stopping Power: Extreme
Recoil: Very Low
SPECIAL FEATURES
Refined gas allows for a silent, invisible shot.
Modifications allow for extreme accuracy
Higher range than other disruptor weapons.
Scope has multiple vision modes.
Modified Galvanization circuits meant to fool forensic examinations.
Framed lined with Kerestian Light-Absorbing Cells.
Strengths:
Extreme Accuracy: The weapon of a true Marksmen, the thin beam will go where it is pointed.
Low Recoil: Like a feather.
Stealth Weapon: The Marksmen in their prime were among the most skilled of stealth blaster research specialists, and this design is based off their most advanced prototypes, some designed by Maple herself, allowing for something nearly unheard of: A disruptor type weapon that can fire an invisible and silent shot. These qualities make it a deadly tool for high accuracy attacks. This particular model has heavily modified examples of the tech found in both the DC-19 Stealth Carbine and the Nightstinger sporting blaster. However in standard mode it will only fire a silent shot, not an invisible one. One in the single shot stealth mode will it fire a fully invisible and silent disruptor bolt.
Longer range than other disruptors: Most disruptors do not go beyond ranges of ninety meters at most. This, while still below the range of even average assault slugthrowing rifles, is still magnitudes better than average disruptor rifles.
One shot is all I need, Mr. Bond: This is a particularly deadly example of a disruptor. Upon impact with organic tissue, the immediate area and the tissues underneath are immediately necrotized from microwave radiation in a half inch radius around the epicenter of the beam. The tissue that is not necrotized in the next three inch radius beyond suffer heavy cellular damage, the tissue under that suffers a massive shock and the nervous system feedback causes pain that would be incapacitating for all but the strongest beings hit in a non fatal area. This weapon is also strong and focused enough to penetrate or simply overwhelm all but the strongest personal energy shields. It will pierce phrik easily, and Beskar will superheated though it will not be destroyed on the first shot.
Forensic deception: The circuitry and gas has been modified so that when a post-mortem examination is conducted on a target killed by the disruptor, the trace energy siganture will fool the examiner into concluding that the target was killed from triple the range of the Disruptor itself.
Multiple vision modes: It comes in thermal, X-Ray, and night vision.
Shadow Proclamation: Activating the weapon's light absorbing cells creates near pitch black conditions in a sixty meter radius.
Weaknesses:
Limited Ammo: The rifle can fire only three shots in standard mode, and one in Stealth mode. One must be sure they have the shot.
Low rate of fire: One must wait as long as twelve seconds before being able to fire due to avoid overheating.
Reload Speed: Disabling the safety valves to remove the spent gas canister is time consuming and so are the reloads for its power cell, as the circuitry on board needs four seconds before it will register.
Weight: This thing is about as heavy as a machinegun, due to the weight of the experimental tech involved in its creation.
Specific ammo: The same weakness as the weapons it is inspired by...the blaster gas needed must be heavily refined and altered...standard gas won't do.
Time consuming to repair: If this thing gets damaged, expect to spend a while carefully piecing it together again, and another, longer while calibrating its circuits again.
No Disintegrations: The Laser Disruptor is both powerful and accurate but not necessarily fatal. Limb shots, while painful, can be survived, and it can never generate enough power to disintegrate an organic target. On rare cases, upper torso shots can be survived.
DESCRIPTION
This Stealth Disruptor Design, among the first of its type, is specifically meant for high risk assassination missions that Knights Obsidian may need to undertake in service to the CIS. Based on designs created by Maple herself when she was still called Uri Udinia, the legacy of The Marksmen has gone on in a strange way to a group possibly even better at operating from the shadows then they were.
Maple's creation is a deadly example of Laser Disruptor that has been paneled with Light-Absorbing Cells to create an opportunity to strike from rhe shadows. On either setting the shot is silenced, but on the true stealth setting the disruptor shot is both silent and invisible. The trade offs are the weight, ammo, and sensitivity of the equipment, but an invisible, silenced disruptor is too effective a tool to dismiss, additionally, it can fool a forensic examiner studying the kill wound that the kill was made at a longer range. Meant to be available to Knight Obsidian Equipment exclusively, Maple sent out two models in order to prove its usefulness. Serial Number One was sent to no less than [member="Darth Metus"] himself, and Serial Number Two was sent to [member="Kurenai Yumi"].
Image Source: https://commons.m.wikimedia.org/wiki/File:EM-1_%22Thorpe%22_Rifle,_Prototype_.280_cal.jpg#mw-jump-to-license
Canon Link: http://starwars.wikia.com/wiki/Nightstinger_sporting_blaster_rifle
http://starwars.wikia.com/wiki/DC-19_%22Stealth%22_carbine
http://starwars.wikia.com/wiki/Light_absorbing_cell
http://starwars.wikia.com/wiki/Disruptor_rifle
Primary Source: Disruptor Rifle
PRODUCTION INFORMATION
Manufacturer: Maple Harte
Affiliation: Closed Market (Knights Obsidian and Maple Harte only)
Model: EM-1 Experimental Rifle, British Military.
Modularity: No
Production: Semi-Unique
Material: Durasteel, Disruptor components, Light Absorbing Cells
TECHNICAL SPECIFICATIONS
Classification: Stealth Laser Disruptor
Size: Average
Weight: Heavy
Ammunition Type: Power cell, gas canister
Ammunition Capacity: 3 (Power Cell) 12 (Gas Canister), 1 (Stealth Setting)
Reload Speed: Low
Effective Range: Low (Two Hundred Meters.)
Rate of Fire: Very Low
Stopping Power: Extreme
Recoil: Very Low
SPECIAL FEATURES
Refined gas allows for a silent, invisible shot.
Modifications allow for extreme accuracy
Higher range than other disruptor weapons.
Scope has multiple vision modes.
Modified Galvanization circuits meant to fool forensic examinations.
Framed lined with Kerestian Light-Absorbing Cells.
Strengths:
Extreme Accuracy: The weapon of a true Marksmen, the thin beam will go where it is pointed.
Low Recoil: Like a feather.
Stealth Weapon: The Marksmen in their prime were among the most skilled of stealth blaster research specialists, and this design is based off their most advanced prototypes, some designed by Maple herself, allowing for something nearly unheard of: A disruptor type weapon that can fire an invisible and silent shot. These qualities make it a deadly tool for high accuracy attacks. This particular model has heavily modified examples of the tech found in both the DC-19 Stealth Carbine and the Nightstinger sporting blaster. However in standard mode it will only fire a silent shot, not an invisible one. One in the single shot stealth mode will it fire a fully invisible and silent disruptor bolt.
Longer range than other disruptors: Most disruptors do not go beyond ranges of ninety meters at most. This, while still below the range of even average assault slugthrowing rifles, is still magnitudes better than average disruptor rifles.
One shot is all I need, Mr. Bond: This is a particularly deadly example of a disruptor. Upon impact with organic tissue, the immediate area and the tissues underneath are immediately necrotized from microwave radiation in a half inch radius around the epicenter of the beam. The tissue that is not necrotized in the next three inch radius beyond suffer heavy cellular damage, the tissue under that suffers a massive shock and the nervous system feedback causes pain that would be incapacitating for all but the strongest beings hit in a non fatal area. This weapon is also strong and focused enough to penetrate or simply overwhelm all but the strongest personal energy shields. It will pierce phrik easily, and Beskar will superheated though it will not be destroyed on the first shot.
Forensic deception: The circuitry and gas has been modified so that when a post-mortem examination is conducted on a target killed by the disruptor, the trace energy siganture will fool the examiner into concluding that the target was killed from triple the range of the Disruptor itself.
Multiple vision modes: It comes in thermal, X-Ray, and night vision.
Shadow Proclamation: Activating the weapon's light absorbing cells creates near pitch black conditions in a sixty meter radius.
Weaknesses:
Limited Ammo: The rifle can fire only three shots in standard mode, and one in Stealth mode. One must be sure they have the shot.
Low rate of fire: One must wait as long as twelve seconds before being able to fire due to avoid overheating.
Reload Speed: Disabling the safety valves to remove the spent gas canister is time consuming and so are the reloads for its power cell, as the circuitry on board needs four seconds before it will register.
Weight: This thing is about as heavy as a machinegun, due to the weight of the experimental tech involved in its creation.
Specific ammo: The same weakness as the weapons it is inspired by...the blaster gas needed must be heavily refined and altered...standard gas won't do.
Time consuming to repair: If this thing gets damaged, expect to spend a while carefully piecing it together again, and another, longer while calibrating its circuits again.
No Disintegrations: The Laser Disruptor is both powerful and accurate but not necessarily fatal. Limb shots, while painful, can be survived, and it can never generate enough power to disintegrate an organic target. On rare cases, upper torso shots can be survived.
DESCRIPTION
This Stealth Disruptor Design, among the first of its type, is specifically meant for high risk assassination missions that Knights Obsidian may need to undertake in service to the CIS. Based on designs created by Maple herself when she was still called Uri Udinia, the legacy of The Marksmen has gone on in a strange way to a group possibly even better at operating from the shadows then they were.
Maple's creation is a deadly example of Laser Disruptor that has been paneled with Light-Absorbing Cells to create an opportunity to strike from rhe shadows. On either setting the shot is silenced, but on the true stealth setting the disruptor shot is both silent and invisible. The trade offs are the weight, ammo, and sensitivity of the equipment, but an invisible, silenced disruptor is too effective a tool to dismiss, additionally, it can fool a forensic examiner studying the kill wound that the kill was made at a longer range. Meant to be available to Knight Obsidian Equipment exclusively, Maple sent out two models in order to prove its usefulness. Serial Number One was sent to no less than [member="Darth Metus"] himself, and Serial Number Two was sent to [member="Kurenai Yumi"].
