Laira Darkhold
Well-Known Member
KANDOSII'BESKAD
Image Source: Here
Intent: Draco's Sword, I got tired of carrying around three weapons, so I combined them.
PRODUCTION INFORMATION
Development Thread:
Manufacturer: Draco Vereen, Ijaat Mereel
Model: Not Applicable
Affiliation: Select PC's
Modularity: Yes
Material: Phrik, Cortosis, Electronics
TECHNICAL SPECIFICATIONS
Classification: Machete/Sword/Spear
Size: One Handed or Two Handed
Length:
Blade:
DESCRIPTION
Rygel Larraq is not often a front line warrior seen with the vanguard. After having built the series of Captain Larraq's Naast'beskad, a fine, proper weapon any warrior, built to the Slayer of Dromund Kaas's specific standards, Draco took back to the design, looking it over and incorporating some lessons with forging, Metallurgy, and Art of the Small to create a fearsome weapon to the Mandalorian’s liking.
The Kandosii'beskad were forged beneath the mountains on Concordia, deep in the Clan Hall of Clan Vereen, tempered in blood and ice from the moon, forged in fires fueled by the Mandalorian's own Force Power, and cast against his beskar hammer and anvil. The spear appears similar to a beskad, with a broad blade, being short, and a tad on the heavy side for a weapon of its size, allowing it to be wielded in the traditional style of Mandalorian warriors easily and seamlessly, fitting for any son of Mandalore.
First, the handle. The hilt of the weapon is made from Phrik, a light-weight substance known for its incredible durability and lightsaber resistance. The main reason Phrik was used for the haft and hilt of the weapon was because of the Echani Molecular Compression technology being fused with it made the beskar hilt far too back heavy given that the blade itself wasn't excessively heavy. The Phrik modeled version is perfectly balanced weight for a one-and-a-half handed sword.
Second the hilt guard is made of Cortosis, a very light weight material as well. This was then alchemized and imbued with Force Power, allowing it to absorb different forms of Force Lightning, such as Ionize and Electric Judgement into the guard, and channel it through the blade when the blade strikes something, in a burst of electrical Force power. Because the hilt is so small, the alchemy has a minimal effect on the weapons' weight. The crossguard's interior is lined with electrical resistant material to prevent the energy from conducting through it and the blade into the hilt or half of the weapon.
Third the buttspike of the hilt and haft are crafted in the manner of a Force Pike's power tip and discharge capacitor crafted from cortosis, forged with the aid of Sith Alchemy to enhance its durability. The small spike can send a shock using a concentrated nerve impulse similar to a stun blast or electrostaff. At the lowest setting, the spear can deliver excruciating electrical shocks, higher setting are said to be able to cause temporary paralysis and muscle spasm, sometimes even death, and at maximum setting the spike can be driven through flesh, bone, and even durasteel plating with relative ease. It is powerful enough to incapacitate a full grown wookiee with its nerve shock.
Finally the blade itself. The blade is crafted from specially treated and altered phrik, molecularly re-aligned so that it would never dull and lose its razor-sharp edge, it would never rust or decay, and would be slightly more durable than normal phrik similar as though it had been Force Imbued. The very minor treatments of metallurgy and alchemy, using old techniques allows it to operate similar to a Sith Sword, absorbing lightning and reflecting energy blasts.
Special Features:
Intent: Draco's Sword, I got tired of carrying around three weapons, so I combined them.
PRODUCTION INFORMATION
Development Thread:
Manufacturer: Draco Vereen, Ijaat Mereel
Model: Not Applicable
Affiliation: Select PC's
Modularity: Yes
- Aesthetics
Material: Phrik, Cortosis, Electronics
TECHNICAL SPECIFICATIONS
Classification: Machete/Sword/Spear
Size: One Handed or Two Handed
Length:
Blade:
- Knight’s Sword: 75 Centimeters
- Greatsword: 120 Centimeters
- Spear: 30 Centimeters
- Knight's Sword: 20 Centimeters
- Greatsword: 30 Centimeters
- Spear: 140 Centimeters
DESCRIPTION
Rygel Larraq is not often a front line warrior seen with the vanguard. After having built the series of Captain Larraq's Naast'beskad, a fine, proper weapon any warrior, built to the Slayer of Dromund Kaas's specific standards, Draco took back to the design, looking it over and incorporating some lessons with forging, Metallurgy, and Art of the Small to create a fearsome weapon to the Mandalorian’s liking.
The Kandosii'beskad were forged beneath the mountains on Concordia, deep in the Clan Hall of Clan Vereen, tempered in blood and ice from the moon, forged in fires fueled by the Mandalorian's own Force Power, and cast against his beskar hammer and anvil. The spear appears similar to a beskad, with a broad blade, being short, and a tad on the heavy side for a weapon of its size, allowing it to be wielded in the traditional style of Mandalorian warriors easily and seamlessly, fitting for any son of Mandalore.
First, the handle. The hilt of the weapon is made from Phrik, a light-weight substance known for its incredible durability and lightsaber resistance. The main reason Phrik was used for the haft and hilt of the weapon was because of the Echani Molecular Compression technology being fused with it made the beskar hilt far too back heavy given that the blade itself wasn't excessively heavy. The Phrik modeled version is perfectly balanced weight for a one-and-a-half handed sword.
Second the hilt guard is made of Cortosis, a very light weight material as well. This was then alchemized and imbued with Force Power, allowing it to absorb different forms of Force Lightning, such as Ionize and Electric Judgement into the guard, and channel it through the blade when the blade strikes something, in a burst of electrical Force power. Because the hilt is so small, the alchemy has a minimal effect on the weapons' weight. The crossguard's interior is lined with electrical resistant material to prevent the energy from conducting through it and the blade into the hilt or half of the weapon.
Third the buttspike of the hilt and haft are crafted in the manner of a Force Pike's power tip and discharge capacitor crafted from cortosis, forged with the aid of Sith Alchemy to enhance its durability. The small spike can send a shock using a concentrated nerve impulse similar to a stun blast or electrostaff. At the lowest setting, the spear can deliver excruciating electrical shocks, higher setting are said to be able to cause temporary paralysis and muscle spasm, sometimes even death, and at maximum setting the spike can be driven through flesh, bone, and even durasteel plating with relative ease. It is powerful enough to incapacitate a full grown wookiee with its nerve shock.
Finally the blade itself. The blade is crafted from specially treated and altered phrik, molecularly re-aligned so that it would never dull and lose its razor-sharp edge, it would never rust or decay, and would be slightly more durable than normal phrik similar as though it had been Force Imbued. The very minor treatments of metallurgy and alchemy, using old techniques allows it to operate similar to a Sith Sword, absorbing lightning and reflecting energy blasts.
Special Features:
- Compression/Decompression: The Weapon's handle is able to be extended, taking it from a One Handed Knight's Sword to a Two Handed Spear using Echani Molecular Compression Technology, while the blade is able to elongate into a Greatsword almost doubling its length.
- Lightsaber Resistant: The Handle is made of Phrik, a Lightweight Lightsaber Resistant Metal, and the blade and crossguard are both alchemized to be Lightsaber Resistant as well.
- Short Out: The Buttspike, pommel, and crossguard are made from Cortosis, able to deactivate lightsabers on contact.
- Blaster Deflector: With the Magnetic Polarity reversed, the weapon is able to deflect Blasters, Charrics, Ion weaponry, and other energy based weapons like a Sith Sword is able to.
- Lightning Absorption: As with basic Sith Swords the guard of the weapon can absorb lightning, electric judgement, and ionize bolts it comes in contact with and release it when the blade strikes a solid object.
- Enhanced Edge: The edge of the blade is much sharper than normal, enhancing its cutting capabilities greatly. Furthermore, the whole blade is constructed similar to that of a Force Pike, allowing it to slice through Durasteel plates with relative ease.
- Stunner: The Buttspike is actually a pretty powerful Force Pike, capable of incapacitating a full grown wookiee on full power, or worse.
- http://starwarsrp.ne...68-naastbeskad/http://starwarsrp.net/topic/76868-naastbeskad/
- http://starwars.wiki...ce_pike/Legendshttp://starwars.wikia.com/wiki/Force_pike/Legends
- http://starwars.wiki...wiki/Sith_swordhttp://starwars.wikia.com/wiki/Sith_sword
- http://starwars.wikia.com/wiki/Force-imbued_blade
