Approved Tech Kami's daggers.

[Lyth Meran]

http://vignette2.wikia.nocookie.net/dynastywarriors/images/6/65/Default_Weapon_-_Kunoichi_(SW4).png/revision/latest?cb=20140414201406
Image Source: http://koei.wikia.com/wiki/Kunoichi/Weapons
Intent: 'A personal weapon for Kami meran
Development Thread: if needed
Manufacturer: Lyth Meran
Model: NA
Affiliation: Kami Meran
Modularity: no
Production: Unique only 2
Material: MerrSteel with a wintrium coating.
Classification: Dagger
Size: One-handed
Length: 13 inches 0.3302 meters
Weight: 1 kg
Special Features: made to be extremely fast and light.

Ultrasonic Vibration Generator in handle.
Superior Cutting/Piercing Power. but is intended to be used as a slashing weapon. able to cut durasteel and alusteel and is effective against most light armor.
the blades are sharp to the point that they can cause accidental cutting.

Strengths: Saber resistant.
able to block several strikes due to both MerrSteel and Winterum. due to the freshness of the winterum it is not fully saber resistant.

Weaknesses: Lacks range
can not be replaced and must be recovered.
Lacks stopping power.
that are fortunately too long to be concealed on the body.
due to it's size the blades are better that parrying than out right blocking
due to MerrSteel it is highly conductive and almost lethal if used in subzero tempetyres
Description:
Made as a present the daggers are custom made with ring guards on the balance point allowing the daggers to be spun at high speed to disorient the opponent the target.
the daggers are in tended as a stealth weapon and used in close quarters or sneak kills as opposed to out right fighting.
the blades are not intended for stabbing they are intended for slashing and coated in a micro coating of winterium.
it is a fast and agile weapon and excellently balanced although a tad too long.
Primary Source: MerrSteel

 

[Gir Quee]

RESEARCH REVIEW
-----
Star Wars Canon:
Pending initial review
------
Starwars Chaos:
Pending initial review
------
WITHOUT DEV THREADS
Pending initial review
------
WITH DEV THREADS
Pending Initial review
------
SUGGESTIONS
Pending Inital review

 

[Gir Quee]

Superior Cutting/Piercing Power.

How much superior are they in terms of cutting power?

Strengths: Saber resistant.

How much saber resistance do these daggers have?

 

[Lyth Meran]

Edited [member="Gir Quee"]

 

[Gir Quee]

Development Thread: http://starwarsrp.ne...tiks-beskargam/

Material: Beskar.

I think this merits more development right now, especially as per the thread, Causstik intends to use it for forging something for himself as well.

Superior Cutting/Piercing Power. able pierce most metals depending on the pressure applies or strength used. metal wise it is limited to say durasteel but can cut armorweve

This feature may warrant more development, though I'm a bit confused by its wording. Typically, Durasteel is considered to be low to average metal in terms of strength. So in other words, being a ble to beat "durasteel" metal wouldn't be particularly unusual. Canon vibro weapons are particularly known to be able to cut through thin layers of durasteel, which makes this sound like it actually has average performance for a weapon of its type.

So basically, we have two options going forward:

1) If the intent is to create a weapon that is significantly and unusually powerful against beskar or other high-grade materials, this will need a lot more development.

2) If the intent is to create to create a weapon that is marginally more powerful than most vibroblades, we don't need more development, but we need to remove the line about it being able o cut through most metals.

 

[Lyth Meran]

[member="Gir Quee"] no problem i am to make beskar nunchuks anyway. will do a dev thread.

 

[Lyth Meran]

[member="Gir Quee"] edited it to use MerrSteel as i have permission to use that.

 

[Gir Quee]

I see no issue with the use of MerrSteel.

I still need to know which of these options that we're using:

1) If the intent is to create a weapon that is significantly and unusually powerful against beskar or other high-grade materials, this will need a lot more development.

2) If the intent is to create to create a weapon that is marginally more powerful than most vibroblades, we don't need more development, but we need to remove the line about it being able o cut through most metals.

So basically, we have two options going forward:

1) If the intent is to create a weapon that is significantly and unusually powerful against beskar or other high-grade materials, this will need a lot more development.

2) If the intent is to create to create a weapon that is marginally more powerful than most vibroblades, we don't need more development, but we need to remove the line about it being able o cut through most metals.

 

[Lyth Meran]

[member="Gir Quee"] edited to effective cutting not beskar cutting. kami has a load of those.

 

[Gir Quee]

Awesome. Pending Admin Approval. Thanks! [member="Spencer Varanin"]

 

[Ellie Mors]

Approved.