Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Haran tracyn tracy'uur's

Status
Not open for further replies.



S8kkbVx.png

OUT OF CHARACTER INFORMATION
PRODUCTION INFORMATION

TECHNICAL SPECIFICATIONS
  • Classification: Blaster, Stun
  • Size: Large
  • Weight: Heavy
  • Ammunition Type: Blaster Packs, power cell
  • Ammunition Capacity: Average
  • Effective Range: Average
  • Rate of Fire: High
  • Damage Output: Extreme
  • Recoil: Low
SPECIAL FEATURES
STRENGTHS
  • Two types of firing modes - Plasma and stun modes can be changed by pressing the light up button. Red means lethal, blue means non-lethal.
  • Being tuned and altered to the maximum by a mandalorian who knows the finer points of weapons, the blaster discharges highly lethal shots thanks to the modified actuating blaster module that can burn and pierce personal heavy armor even against those who are in Beskar'gam.
WEAKNESSES
  • Due to upgrading the body of the blaster to something more durable, it is heavier than the unmodified Westar blasters.
  • To get the full power of the weapon, the more expensive type of blaster gas has to be used for the weapon.
DESCRIPTION
Quote from wookieepidia -
"As a product of the WESTAR series of blasters, the WESTAR-35 was the successor to the WESTAR-20 and WESTAR-34 blaster pistols. The WESTAR-35 was also capable of firing both yellow or blue-colored bolts of plasma.
"

These pair of blasters have been taken apart into their individual pieces and rebuilt with newer or rare replacement parts and with some modified even further. Starting with notable the interior changes where gas used to be refiled has been replaced with a power cell so that the weapon can be used for non lethal means in the event that the weilder does not wish to harm the target. The grip of the blaster has been hollowed out and mechanical components added to take in a blaster pack which is what now contains the compressed gas.

The actuating blaster module which sits behind the prismatic crystal housing was purchased from the black market, with the improvements made by Cynthia Solus Cynthia Solus to increase the power and penetration of the weapons shots, however unlike most modified this part should last for a long time to come without the usual wear down and quick developing faults. Working alongside the actuating blaster module is the XCiter, Heter-valve and Variable pressure adaptor. The XCiter which also goes by the name conversion enabler would agitate gas molecules, when the trigger is squeezed a small amount of gas would be released into the XCiter. Using high quality or volatile gas would create searing blasts of plasma.

Perhaps one of the most unique parts in this blaster is the Prismatic Fire Crystal, Unlike standard crystals energy that passes through can set their target on fire. These are unique only to Vanquo and Clan Solus. To keep the blaster cool underneath the new casing of the Haran tracyn tracy'uur's is a heat radiator shroud, this works to keeping the temperature of the weapon to prevent overheating.

Going onto the over all looks of the weapon. With rebuilding the weapon from the ground up some modifications where needed to compensate for the internals. The barrel is slightly longer than the original design along with extra casing around the exterior to allow a little more room inside. On the back of the blaster is a small holographic screen that displays a shot counter as well as power cell charge. Both pairs of blasters had also been given a new paint job to reflect the Clan Solus colours but also works given the name they had been given. On the sides of the Haran tracyn tracy'uur's is a switch to change fire modes, safety, semi-automatic, burst, automatic and three second beams. How ever only two settings work for the non lethal setting, that been safety and Semi-automatic the other two settings will be locked off. At the back of the gun is also an adjustable wheel to set the amount of gas released into the XCiter. For safety reasons it has a set limit it can be set to, this is to prevent damage to the user and the weapon.

bJYbnIs.png



 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom