Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Z-2046 Light Disks

Status
Not open for further replies.
8C9k9F5.png



Image Source: Disney Art Folio, edits by [member="Rookie"]
Intent: Iziz's personal light-sabers
Development Thread:
Making the Blades
Manufacturer: Iziz Vei
Model: Double-Ended Spinning Shoto
Affiliation: Iziz Vei
Modularity: The Plating, Focusing lenses, Crystals, and Power Cells are able to be upgraded.
Production: Unique
Material: Diatium / Ion Power-cell, Synthetic Crystals as well as fine focusing Pontite lenses and Duraplast plating.

Classification: Double ended Dagger.
Size: One-handed
Length: 1.5m at full extension
Weight: 0.5kg
Special Features:

  • Switchable Double Ended Blades
  • Light-Saber Resistant Guard
  • Length Control Dial
  • Spinning Disc / Foldable Hand-Guard
  • Excellent throwing weapon.
Description: These once rather basic Light-sabers followed the same template as the late Exar Kun, aside from few very small differences. Now, altered for the Sith Knight's personal fighting style, they incorporate much of the style employed by the Inquisitors during the early stages of the Jedi Rebellion, fighting against the few remaining Jedi. The weapons boast a semi-circular hand-guard, which is more than capable of protecting the users grip with its duraplast plating, which, after folding out, becomes an electromagnetic superconducting circular rail, using properties of quantum levitation for the Saber's beam emitters to spin on. The Rails are capable of spinning the saber up to staggering rates of 1500 Rp/m, creating a devastating and seemingly solid disc of light-saber energy. The Electromagnetic superconductor as well as its spinning function, repels the electromagnetic field which encompasses the heated blade of a light-saber, combined with Duraplasts resistance of heat, this makes the defensive outer layer of the blade quite resistant to the weapons of the Jedi and other offensive EM Fields. However, while duraplast is resistant, it's not invulnerable, should a direct strike hit the underneath of the ring or the side of the hilt not protected by the superconductor, the Duraplast, and thus, the guard, will be hewn through.

Though, unlike most light-sabers which have room for a second hand, the spinning light-sabers of Iziz are tighter, more condensed and leave no room for a two handed stance, reflecting the Jawa's fighting style miraculously. This allows the guard to be tighter to the hand, becoming a more effective guard than the wide open ambient space of the original spinning blades of the Jedi Inquisition (which was readily taken advantage of.). the reduction in size also benefits the spinning speed, the size allowing a faster Rp/m due to the smaller circumference. The final advantage of the smaller size entails that larger creatures with larger hands, simply cannot fit their grip behind the guard of Iziz's blade, making it unusable by beings of human size and higher.

For control, the weapons boast what seems to be a small 'T' shaped gearbox-like switch on the side of each blade. The switch controls the length of the beams as well as which of the blades are activated at any given time. Pushing the switch up or down toward either of the ends of the weapon ignites only the blade which faces that direction, at the length of 25, 50 & 70cm long at each of the three pressure points which lay at intervals down the switch. While another three pressure option, laying to the side between them, allows 'both' blades to be ejected at those sizes and intervals. The manual switch makes the weapons harder to be effected by techniques such as trakata, not giving them a button to simply switch off, as well as adding the user's thumb to overpower, while simultaneously enabling a greater range of skill and abilities for the user.

The only difference between each of the two blades, is one is powered by a high output Diatium power cell, giving it strong focused cutting power through its pontite crystal lens, making it able to hue all but strong Light-Saber resistant armour as if the substance it cleaved through didn't exist. While the other, is powered by a similarly high output Ion power-core, the strong focused blade becoming the bane of personal energy shields and sensitive electronics, however, while it can cut through undefended skin without effort, it is far less effective against Light-Saber resistant armours.

Primary Source: Here
 
[member="Iziz"]

We'll need a 10 to 20 post dev for the spinning saber and please list the duraplast as semi resistant to lightsabers. It can take glancing blows but a solid strike will still cut it.
 
[member="Ordo"]

The wiki says that duraplast provides a strong resistance to lightsabers.

Edit: The railing that runs across it is also a electromagnetically charged superconductor, which have deflected light-sabers before.

but sure, i can get that dev thread up today~
 
[member="Ordo"]

Dev thread up, can go further if need be.

I added a note about the superconductor's part in defending the hilt.

As light-sabers are enveloped in an EMField, meeting another EMField would likely collide. With Duraplast giving "very strong protection against lightsabers."
 
There is no source in EU or canon that gives duraplast strong lightsaber resistance, wiki is not giving you credible information.

All lightsaber resistant materials are restricted. If you insist on it being "strongly resistant" it will need to be added to the list of restricted materials. However, considering I've read the source material that originated duraplast I'll tell you from experience. Wiki is incorrect.

[member="Iziz"]
 
[member="Ordo"]

Okay, I added a note that says

"The Electromagnetic superconductor as well as its spinning function, repels the electromagnetic field which encompasses the heated blade of a light-saber, combined with Duraplasts resistance of heat, this makes the defensive outer layer of the blade quite resistant to the weapons of the Jedi and other offensive EM Fields. However, while duraplast is resistant, it's not invulnerable, should a direct strike hit the underneath of the ring or the side of the hilt not protected by the superconductor, the Duraplast, and thus, the guard, will be hewn through."

To reflect that the Duraplast is indeed not 'that' light-saber resistant.

Edit: I do TRY to not be an ass <3
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom