Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Ydrin's Personal X-23 LS Rifle

Status
Not open for further replies.
Xreek-23 Long Stock Rifle (X-23 LS Rifle)
Rydda.jpg
(The Gun In The Image)

Intent: To create a personal weapon for Ydrin
Development Thread: If needed

Manufacturer: XREEK Inc. were original manufactures, Ydrin refurbished and repaired it
Model: Xreek-23 Long Stock (X-23 LS)
Affiliation: Ydrin
Modularity: No
Production: Unique
Material: Durasteel, Brass, Crystal, Silver, Mahogany


Classification: Slughthrower
Size: Handheld
Length: 1.25m
Weight: 2.9kg

Ammunition Type: Bullets
Ammunition Capacity: 5
Effective Range: 350m

Rate of Fire: Semi-Automatic

Special Features: The X-23 LS has sharpened spikes along the underside of the hand guard, enabling it to be used for punching in close quarters combat. The underside of the barrel is lined with a sharpened blade of durasteel, allowing it to double as a long sword in battle.

Description: The X-23 LS is an old antique sword that has been in the hands of Ydrin's family for generations. Before leaving his family, Ydrin took the rifle with him and refurbished and repaired it into what it is know. The rear stock is made out of mahogany. Engraved into the wood is an intricate engraving of a dragon. Silver has be in lain into the engravings, making the design more obvious. The rear stock is attached to the fore stock, a metal stock that has three arches, one of which is next to the trigger, which are filled in with clear crystal. In front of the trigger, on both sides of the stock, there is a fixed, circular, blue crystal semi-orb (It is cut in half, half on each side) surround my brass claws which seem to hold it in place. The hand guard, which leads into the trigger guard, had three, sharp spikes attached allowing for its use in punching. At the very front of the stock, the is the bolt where ammunition is loaded and the gun is cocked. The whole stock is about 45cm long. From the stock there is a 80cm long, thin barrel which is just plain, tempered, Durasteel. Affixed to the bottom of barrel is a 3cm wide, thin blade that runs the full length and tappers to an edge.
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom