Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech SF-01 (DE-10 modified)

Status
Not open for further replies.
OUT OF CHARACTER INFORMATION

pic2304.jpg

PRODUCTION INFORMATION
  • Manufacturer: BlasTech
  • Model: (modified) DE-10 – SF-01 (Saab f’Czeht’sk - 01)
  • Affiliation: Saab f'Czeht'sk
  • Modularity: No
  • Production: Unique
  • Material: Durasteel, Verpine shatter gun components
TECHNICAL SPECIFICATIONS
  • Classification: Verpine shatter gun
  • Size: Handheld
  • Length: 345mm
  • Weight: 1.8kg
  • Ammunition Type: Duraplast slugs (special made)
  • Ammunition Capacity: Magazine capacity of 7.
  • Effective Range: 45 m
  • Rate of Fire: Single-Action
SPECIAL FEATURES
  • Produces no flash nor much sound
DESCRIPTION
Saab found the regular DE-10 whilst stranded on Saleucami; using spare time between working on his ship, he converted the pistol into a Verpine shatter gun of his own imagining. Based on a standard Verpine design, he saw the heavier weight of the DE-10 frame as an advantage, allowing for him to install more powerful electromagnets. The combination yielded a heavier gun but with very similar recoil found in more conventional shatter guns.

Due to Saab not having access to state-of-the-art machining facilities…the gun is far less accurate compared to regular Verpine guns, though it maintains a rugged reliability, and can take more bumps than a standard Verpine shatter gun without it messing up the internals. The cylindrical power cell was refitted to hold the Verpine rounds, which acted as a revolver; the gun was reloaded via a break action in which the user could insert more shatter gun ammunition. The rounds for the gun had to be hand-crafted individually by Saab, making each and every projectile that much more valuable; made from any materials he could find, his current ammunition was made from smelting duraplast that he 'borrowed' from some of the abandoned armour sets laying around. The chamber was cycled by thumbing a small lever on the side of the frame.

During his testing of the new design, Saab found while the projectile stayed lethal for further than a blaster, it was only accurate up to 10m. Anything past that the Verpine rounds tended to violently tumble; flying up, veering off either side or crashing to the ground within a few more feet. Based on sheets of metal he managed to hit from longer distances…Saab concluded that at longer ranges the Verpine projectiles retained their momentum. Although they may not have been able to penetrate armour at long range the impact alone, with the ‘tumblers’ as he called them, would be enough to cause severe physical trauma…if it managed to make contact.

Strengths:
  • Longer range than a standard blaster (maintained killing velocity past 30m and up to 45m)
  • Substantial armour penetration at closer ranges (under 10m the projectile could easily pass through an armour of plastoid…under 5m it would almost retain enough momentum to do twice that)
  • Little to no recoil
  • Ruggedly reliable
  • Near-silent with no visible muzzle flash
Weaknesses:
  • Heavy in hand
  • Longer range is hampered by it’s lower accuracy
  • Hard to find ammunition, the ammunition is also heavy in quantities
  • Magazine size was small and loading each round individually took a substantially longer time than reloading a blaster.
  • Low rate of fire (even compared to a standard Verpine shatter gun)
 

Atlas Kane

Guest
A
Hello, I'll be the factory judge reviewing your submission. If you have questions, please feel free to respond to this thread once we are underway.
 

Atlas Kane

Guest
A
Could you write in Saab as the affiliated person under the "Affiliation" section, as he seems to be the owner of the gun? In addition, could you specify on the ammunition type a little more, Verpine Shatter Guns can use almost anything as ammunition, so could you elaborate a little more on what this special made ammunition is?

Looks good otherwise. Really enjoy the fluff you gave the weapon! ^_^

[member="Saab f’Czelt’sk"]
 
@[member="Atlas Kane"]

Edited; Added:

The rounds for the gun had to be hand-crafted individually by Saab, making each and every projectile that much more valuable; made from any materials he could find, his current ammunition was made from smelting duraplast that he 'borrowed' from some of the abandoned armour sets laying around. The chamber was cycled by thumbing a small lever on the side of the frame.

the ammunition is also heavy in quantities

Rate of Fire: Single-Action (from Semi-auto...changed because I felt it fits the gun better)
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom