Emberlene's Daughter, The Jedi Generalist
OUT OF CHARACTER INFORMATION
Designed by sasori to be a strong manufacturing material they could use across all of their products for a more uniform design. The layers of protection use standard materials set and pressed to become a material that can be manufactured easily enough with their large array of stations and foundries. More of the work that has been going into what the larger materials that Sasori designs and makes. The base of the plating is reinforced duraplast that is a strong manufacturing material.
Then it is a layer of alusteel over reinforced duraplast and with a coating. The larger and more complex vehicles and ships unable to use the synthweave like the smaller models. The absorbital giving a silver mirrored look for the ingots of it and the plates. Once the material is refined to work as an alloy on ships or vehicles. The heavier weight that it presents compared to the marvel that was the synthmesh designed by Sasori goes a long way. It isn't as strong or super lightweight but it is easier to produce to give higher levels of protection is easier to do or on speeders and as armor plating for the soldiers.
The years of manufacturing the metal have given Sasori a largely better understanding of what it is and what it can do. With improvements to the process and refinement for the heavier aspects the Nnth metal tiers have remained but their ships are better able to incorporate without being hindered or over encumbered with the largely improved designs. Matsu's engineers and some of the others who worked on it developed the self repairing overhaul as a means for their products to last much longer then just about anything on the market.
- Intent: To sub Sasori equipment
- Image Source: N/A
- Canon Link: N/A
- Permissions: My Subs
- Primary Source: N/A
- Manufacturer: Sasori
- Affiliation: Company Name (Sasori)
- Market Status: Closed-Market
- Model: Material
- Modularity: N/A
- Production: Mass-Produced
- Material:
- Laminanium
- Alusteel
- Reinforced Duraplast
- Absorbital
- Exotic Matter
- Classification: Exotic Material
- Weight: Weightless
- Color: Prismatic
- Resistances:
- Energy: High
- Kinetic: High
- Lightsabers: High
- Other:
- Sonic: High
- Radiation: None
- EMP/ION: High
- Elemental:
- Fire: Average
- Cryo: Average
- Acid: Average
- Force:
- Lightside: None
- Darkside: None
- Vacuum: High
- Variable Class Armor
- Aurek - Massive scale (stations and structures)
- Besh -Immense scale (battlecruisers and fortresses)
- Cresh - Large scale (heavy vehicles and starships)
- Dorn -Moderate scale (vehicles and starfighters)
- Laminanium: Designed like a Quellian ship the hull of the orbital platforms has a thin layer of the material to improve repairs and over time depending on the amount of damage it is able to patch itself up.
- Exotic Matter: The ethereal nature of the metal makes it near weightless despite being and looking dense within the pocket dimension of dream. In realspace it can be grasped and there is a steady supply able to be used by Krass.
- Exotic Particles: Largely unknown and not seen in the galaxy before. It isn't invincible nor is it really strong but it reacts violently near dark and anti-matter which can disrupt and destroy it or even cause it to rupture and disintegrate.
- Self Repairing: Built with a protective layer to patch the vehicle in the event of damage. The time table is dependent upon the amount of damage with smaller tears being easier and faster to repair then gashes which can take hours to reform.
- Note: Only the layer can repair not the full plate armor itself the plating can be damaged still but the underlayer of Laminanium can reform and remain.
Designed by sasori to be a strong manufacturing material they could use across all of their products for a more uniform design. The layers of protection use standard materials set and pressed to become a material that can be manufactured easily enough with their large array of stations and foundries. More of the work that has been going into what the larger materials that Sasori designs and makes. The base of the plating is reinforced duraplast that is a strong manufacturing material.
Then it is a layer of alusteel over reinforced duraplast and with a coating. The larger and more complex vehicles and ships unable to use the synthweave like the smaller models. The absorbital giving a silver mirrored look for the ingots of it and the plates. Once the material is refined to work as an alloy on ships or vehicles. The heavier weight that it presents compared to the marvel that was the synthmesh designed by Sasori goes a long way. It isn't as strong or super lightweight but it is easier to produce to give higher levels of protection is easier to do or on speeders and as armor plating for the soldiers.
The years of manufacturing the metal have given Sasori a largely better understanding of what it is and what it can do. With improvements to the process and refinement for the heavier aspects the Nnth metal tiers have remained but their ships are better able to incorporate without being hindered or over encumbered with the largely improved designs. Matsu's engineers and some of the others who worked on it developed the self repairing overhaul as a means for their products to last much longer then just about anything on the market.
Last edited:
