OUT OF CHARACTER INFORMATION
DESCRIPTION
After careful planning and getting the sword design approved by the Tech division within the Bounty Hunters Guild, Jahan was allowed to create a Unique weapon. Dubbed "Honor Cleaver" which is slightly funny considering the weapons cruel edge. Designed to remind Jahan of Cathar since he swore never to return. The sword hold a small family crest crudely engraved by his claw on the blade. The blade itself if made of Beskar and follows done all the way through the hilt as a proper sword should. The main blade that is symmetrical with the hilt and grip is double edged and has an opening in the middle for upgrades to be blade on the blade or to caught other melee weapons. The space between secondary blade and main blade also serves for catching as well. The blades themselves are beskar forged and treated to a specific design. If you were to pay close attention to the blade edges on the weapon then one might say they could see very small circular dents about the size of an ants head. These dents or pores can be traced all the way down the edges on the "Honor Cleaver". Micro-pores are the name for them. Each pore contains a very small amount of Xenoboric acid, which is corrosive by nature. The pores contain the chemical till a strike is made, apon physical contact the pores leak the chemical into the wound or onto the surface of said strike. Pairing this design with the Ultrasonic vibro generator in the hilt the weapons, its cutting power is rather immense but not on par with that of a lightsaber. With the acidic touched blade the Honor Cleaver has the potential to weaken armored opponents after every strike and over time. Scientifically the Beskar blade is coated in a corrosive resistant substance that protects the blade itself from falling apart. This was inspired from the Acidic Paragon vibro ax commonly used in the cold war long ago.
Over all the Honor Cleaver is rather hearty but had some significant draw backs and risks that are a need to know. Firstly being a double edged blade. A significant blow could harm the user if blocked or parried incorrectly. Results of which would be horrid factoring all the weapons other features such as its acidic enhancement and cutting power when turned on. Perhaps the most dangerous draw back is the acidic enhancement itself. Chemical burns often produce toxic fumes on contact with foreign matter. Such fumes should never be breathed in as it could cause harm to the wielder and opponents lungs. As a safety precaution a mask, helmet or rebreather is requirement.
- Intent: Introduce Jahans Cathar honor blade
- Image Source: Star Wars the Old Republic
- Canon Link:
- Primary Source: Cathar Honor Blade, Vibrosword, Paragon vibro ax
- Manufacturer: Jahan the Lion
- Affiliation: Jahan the Lion
- Model: N/A
- Modularity: Yes, Different Vibro generators can be swapped out.
Production: Unique
- Material: Beskar blade core & hilt ,Leather wrapping And Vibrosword electronics.
- Classification: Two-handed/One-handed Vibrosword
- Size: Average
- Weight: Heavy
- Ultrasonic Vibration Generator - Allows extreme cutting power as all Vibroweapons are known for.
- Xenoboric acid filled Micro-pores - Located on the blades edges. The weapon exudes a corrosive acid on physical contact, weakening armor over time and causing significant chemical burns on flesh.
- Beskar blade - Heavy dense blade and lightsaber resistant.
- Style! - Styled to look like a Cathar honor blade.
- Beskar blade: Resistant against lightsabers and very dense.
- Vibro-sharp: When turned on the Ultrasonic Vibration Generators allow the blade to cut through variety of materials with much more efficiency. Producing deep wounds by the slightest touch of the blade. This includes flesh, bone and even durasteel plating.
- Acidic blade: The beskar blade has been tempered with acidic resistant substances and then was designed with tiny micro-pores filled with small amounts of Xenoboric acid. This feature further increases the weapons cutting power but not in one fell swoop. Acid takes time to cause chemical burns. The main purpose behind an acidic blade was mainly for armored opponents. Each strike slightly weakening the armor on contact.
- The Vibrosword is dense and heavier than normal, wielding requires more strength for most species in the galaxy.
- Vibro Generator must be turned on! If its left off the weapon wont work to its full potential!
- Double edged blade has the potential to harm the user too which would be disastrous.
- Electrical attacks will disable the Vibro Generator. Leaving the wielder with a standard sword.
- Acid burns produce can produce toxic fumes that could harm both wielder and opponents lungs. A mask of some sort is highly recommended.
DESCRIPTION
After careful planning and getting the sword design approved by the Tech division within the Bounty Hunters Guild, Jahan was allowed to create a Unique weapon. Dubbed "Honor Cleaver" which is slightly funny considering the weapons cruel edge. Designed to remind Jahan of Cathar since he swore never to return. The sword hold a small family crest crudely engraved by his claw on the blade. The blade itself if made of Beskar and follows done all the way through the hilt as a proper sword should. The main blade that is symmetrical with the hilt and grip is double edged and has an opening in the middle for upgrades to be blade on the blade or to caught other melee weapons. The space between secondary blade and main blade also serves for catching as well. The blades themselves are beskar forged and treated to a specific design. If you were to pay close attention to the blade edges on the weapon then one might say they could see very small circular dents about the size of an ants head. These dents or pores can be traced all the way down the edges on the "Honor Cleaver". Micro-pores are the name for them. Each pore contains a very small amount of Xenoboric acid, which is corrosive by nature. The pores contain the chemical till a strike is made, apon physical contact the pores leak the chemical into the wound or onto the surface of said strike. Pairing this design with the Ultrasonic vibro generator in the hilt the weapons, its cutting power is rather immense but not on par with that of a lightsaber. With the acidic touched blade the Honor Cleaver has the potential to weaken armored opponents after every strike and over time. Scientifically the Beskar blade is coated in a corrosive resistant substance that protects the blade itself from falling apart. This was inspired from the Acidic Paragon vibro ax commonly used in the cold war long ago.
Over all the Honor Cleaver is rather hearty but had some significant draw backs and risks that are a need to know. Firstly being a double edged blade. A significant blow could harm the user if blocked or parried incorrectly. Results of which would be horrid factoring all the weapons other features such as its acidic enhancement and cutting power when turned on. Perhaps the most dangerous draw back is the acidic enhancement itself. Chemical burns often produce toxic fumes on contact with foreign matter. Such fumes should never be breathed in as it could cause harm to the wielder and opponents lungs. As a safety precaution a mask, helmet or rebreather is requirement.
