Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Work In Progress CQB Gun

OUT OF CHARACTER INFORMATION
  • Intent: To create a generic Shotgun.
favorite_cod_zombies_guns__the_m1897_trench_gun_by_comannderrx_d9tdiwv-fullview.jpg

PRODUCTION INFORMATION
  • Manufacturer: BlasTech Industries
  • Affiliation: Nathan Bloodscrawl Nathan Bloodscrawl Blastech Industries.
  • Market Status: Open
  • Model: N/A
  • Modularity: Yes (Can load Alternative ammo, and the stock can be sawn off. Can be fitted with a bayonet)
  • Production: Mass-Produced
  • Material: Durasteel, blaster components
TECHNICAL SPECIFICATIONS
  • Classification: Shotgun
  • Size: Average
  • Weight: Average
  • Ammunition Type: 12 Guage Shotshell
  • Ammunition Capacity: Very Small | 7
  • Effective Range: Point Blank (35 meters)
  • Rate of Fire: Average
  • Damage Output: Very High
  • Recoil: Low
SPECIAL FEATURES
  • Extreme Damage Shotgun, firing a devastating spray of pellets capable of stopping even the stoutest being cold, or even blasting weaker enemies backward
  • Accepts a wide variety of alternative Ammo and can be fitted with a bayonet. The stock can be sawn off for concealed carry and it can have a sling fitted to it
  • Heavy duty, low maintenance
  • Cheap and easily replaced
STRENGTHS
  • Gib-Maker: The sheer power of its blasts can possibly severely wound or even kill the stoutest of beings, even just using the basic 12 guage shot shell ammo
  • Custom: Can Load a vast variety of alternative ammo, as long as it is 12 guage, and it's reinforced to fire alternative ammo. The stock can be sawn off and concealed under a coat and it can be fitted with a bayonet
  • Apocalypse Proof: Very Difficult to damage. Goes a long time without maintenance in the field, and repairs easily to full condition even with limited resources. Can fire even after full immersion in sand, snow or mud
  • Cheap: Cheap to make even in a garage or shed despite official discontinuation it proved so popular due to its simplicity that it's undergone extreme proliferation and production is of extreme difficulty to disrupt now. It can be found nearly anywhere
  • Accuracy: Accurate at the ranges it's designed to hit, and may even catch multiple enemies with a single blast
  • Ammo easily located: It's default 12 guage ammo is one of the few forms of solid ammunition that can be located on most worlds, and production of said ammo is almost as difficult to disrupt as the gun it goes in
  • Recoil: Surprisingly gentle, allowing one to stay on target
WEAKNESSES
  • Range: It'll be very difficult to hit anybody or due much damage after 35 meters
  • Ammo Count: Only 7 shots
  • Ammo Limits: While the default ammo can be found almost anywhere, there will only be so much of it one can carry. Up to three full reloads on an ammo harness, six if one brings two, but bringing more than one may end up constructing movement
  • Exotic Ammo Limits/Expenses: Alternate ammo can be expensive, and must almost always be purchased and brought to combat before hand because you definitely won't find exotic reloads in the field
  • Medium/Heavy Armor: It can certainly blast someone backward, but it's default ammo has more trouble penetrating above light armor categories. You may need to empty most of the gun for medium armor or all of the gun for heavy armor to defeat their protection, and that's assuming all your shots land
DESCRIPTION

This Model of Shotgun had been discontinued by Blastech despite its effectiveness, due to advancing technology. Despite this, it can be found almost anywhere in very large numbers, either on battlefields, in guerilla stockpiles, Hang Hideouts, the corpses of dead warriors or mercenaries or in pawn shops due to the sheer ease of manufacturing it. Morris acquired its blueprints and can reproduce it at any molecular furnace or atomic forging device, provided he has the necessary raw materials
 
Last edited:

Users who are viewing this thread

Top Bottom