Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech The Divider

Status
Not open for further replies.
futuristic_sniper_rifle_by_graphicdesign87-d7lhurd.jpg
Container:​
thumb-400x285.jpg

Image Source: http://studio-onyx.deviantart.com/art/Futuristic-Sniper-Rifle-459368185
Case: http://www.rnrassociates.com/wordpress/carbon-fiber-briefcase/

Intent: To create a unique weapon
Development Thread: None
Manufacturer: LOOM
Model: Di-7 Rifle
Affiliation: Ultimatum, LOOM
Modularity: Can have adjustments done to the scope, and under barrel attachments
Production: Semi-Unique (five only)
Material: Thermal Gel for the silencer, Timantium for stock, Alusteel for majority of components, Nutorium for case,

Classification: Sniper Rifle (blaster)
Size: Two handed
Length: 1 meter
Weight: 13.6 kg
Ammunition Type: Powercell Gas canister
Ammunition Capacity: 10 shots
Effective Range: Optimum: 150 meters
Maximum: 500 meters
Rate of Fire: Bolt Action (1 shot per minute)

Special Features: The Divider has a suppressor to silence the fire from the sniper. The suppressor is sensitive to heat and requires that the barrel cool inbetween shots. To this end Thermal Gel has been used around the suppressor to help resist some of the heat. The case for the sniper is coated in Nutorium so that it can defeat scanners. The Sniper is built to be quickly taken apart and put back together, so the case is made to appear generic.

Description: The Divider Sniper Rifle was initially created for Ultimatum's personal use for long range removal of enemies. After the first plans were drawn however, Ultimatum realized that their use should be more specific. He started with a generic sniper rifle and added a suppressor to make them more clandestine as well as made them to be taken apart and reconstructed with ease. The design wasn't intuitive, eliminating most of the danger of a foe getting hold of the rifle and rebuilding it without much study. Trimantium was used in the stock and then the rest of the weapon's metal workings were made of Alusteel. Finally, thermal gel was placed within the suppressor, not very much, but enough to speed the cooling process. The case was then built with Nutorium casing so as to defeat sensors so that the rifle would be hidden.

Primary Source: N/A
 
RESEARCH REVIEW

Star Wars Canon:
Pending initial review

Starwars Chaos:
Pending initial review

WITHOUT DEV THREADS
Pending initial review

WITH DEV THREADS
Pending Initial review

SUGGESTIONS
Pending Inital review
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom