Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Phase I Shawken Infantry Armor

Status
Not open for further replies.
chris-sulzbach-advtrooper-render.jpg

Image Source: Xcom 2 concept art https://www.artstation.com/artwork/QGrBx
Intent: To create the Armor for the soldiers of Shawken.
Development Thread: N/A

Manufacturer: ZNI
Model: Phase I Shawken Infantry Armor
Affiliation: Shawken military
Production: Mass-produced
Modularity: Camo colors, certain components (in the description)
Material: Armorweave-bodyglove, Flex-armor, Duraplast.
Classification: Multi-Role
Weight: 15 kg
Quality: 7
Mobility: 8

HELM COMPONENTS
  • Oxygen reserve tank (1 hour)
  • Voice commands for vision modes and the like
  • Thermal/night-vision/ultraviolet/infrared vision modes
  • Targeting visor
  • Polarized lenses
  • Broadband antenna w/rangefinder
  • Encrypted, Internal comlink
  • Rebreather
  • Breathing filters to allow for breathing in dangerous gas or air environments that still have breathable oxygen.
  • HUD w/internal overlay
  • Internal Macrobinocular for up to 4x zoom capabilities.
  • Annunciator, makes speech more comprehensible.

ARMOR COMPONENTS & PARAPHERNALIA
  • Combat vibro-knife (Usually kept either against the shoulder, leg or utility belt)
  • High traction soled boots for easier sprinting and stability.
  • Body glove, it's an insulated and airtight body glove underneath the armor plating.
  • Coolant system, to prevent the overheating of the wearer during combat.
  • Can be pressurized, Allows the wearer to fight in space or vacuum until air runs out.
  • Boots are capable of being magnetized to allow for walking in zero-g environments or when it's needed.
  • Blast energy sinks, distributed around the armor to absorb energy from a blaster bolt and lessen the damage one would otherwise take from a direct hit.
  • Personal Energy Shield (Read description)
UTILITY BELT
  • Storage compartments for extra ammo (power cells, gas canisters and clips)
  • lower back mounted Grenade bandoleer (can fit two grenades)
  • Pockets for miscellaneous items
  • Ration capsules (Enough for two days.)
  • Grappling hook
  • Grappling spike launcher
  • First aid kit (bacta shots, bandages, stim packs, Synthflesh etc.)
  • A pack of sanitary wipes
  • Multitool

Strength
Mobile: This armor is quite mobile.
Personal shield: This armor features a personal energy shield.
Tough: This armor is quite tough.

Weakness
Powercell: Requires help to replace.
Soles and hands: These areas aren't covered by the personal shield.


DESCRIPTION
The Phase I is meant to take that balance between protective, multi-purpose, and inexpensive and blend it seamlessly though with room to improve upon at a later date. Based on the solid foundations of the technological advancements made Galaxy-wide, the Phase I is a product of years of data collected in the many battles that have raged across the galaxy, historic or modern. Mistakes or flaws made in previous armors and corrected to suit the needs of war perfectly.
Like with all armors in the galaxy the Phase I doesn’t make a soldier impervious to damage but it does help. It’s meant to provide the well-trained trooper with both protection and flexibility in combat, whether it's urban assault or storming a fortified position so that they can adapt to the ever-changing situation of a battlefield to the best of their capability.

From the inside out, the wearer of Phase I is first encased in an armorweave bodyglove that serves both as comfortable padding and as a layer of defense in and of itself. This same bodyglove is also insulated and airtight so as to provide the troopers with protection from a variety of environments and even allow for space or vacuum operation for as long as the internal air supply lasts.

The tri-weave Flex-armor consists of an outer and inner layer made from a Quadanium steel-dipped tri-weave fiber mesh. Sandwiched in between is the MR-fluid based liquid armor system. The proprietary ZNI Smart MR-fluid hardens in response to impacts, specifically designed to provide superior shock absorption with the gel dissipating the force behind the strike throughout the gel mesh. The liquid body armor layer is also more flexible than the ceramic or fiber-based alternatives used in some suits, allowing for greater maneuverability and faster starting running. Designed to withstand up to 6gs of acceleration, the suit increases navigational capability by tolerating high acceleration maneuvers without risk of injury, for example with high speed insertions from drop ships or in vacuum combat. The flex-armor vest is mainly meant to provide additional protection to the torso, as that is where most attacks will invariably hit. In the upper body, the flex-armor cuts off at the shoulders and reaches all the way up to the chin forming a turtleneck that reinforces the armor of the neck as well, whereas in the waist area it extends down to mid-thigh, adding protection to the oft-exposed vessels of the femoral region.
Last come the strategically placed duraplast plates, encasing the chest and back, shoulders, upper and lower arms, hands, thighs, calves, and feet. The helmet is also wrought entirely out of duraplast, and is fitted snugly above a neck guard. The Phase I also includes groin guards for all genders, and it should be noted that the chest protection in the variant for breasted individuals does not feature a pronounced a breastplate.

A small pack against the spine holds a personal energy shield to provide just a bit more protection but it's only capable of taking on two or three solid hits against the shield makes it fail, at which point a new power cell will need to be inserted which requires help from another to do so. The personal energy shield device generates a small almost invisible field only a millimeter above the armor but leaves the hand and soles of feet unprotected to allow for running and to allow for use of the soldiers hands more effectively.

The rest of the armor components all follow on top (such as the utility belt, etc.), and extra ammo compartments, aside from the two on the utility belt, can be located either on the upper arm(s) or on the thigh(s), depending on the wearer’s physique and preferences. The standard-issue combat vibro-knife can be carried in various positions, largely depends on the preference of the soldier though choice is partially limited to the thigh, leg, shoulder, upper arm and utility belt by design.

The pouches and compartments of the Phase I's highly functional utility belt contain a multitude of equipment, including a grappling hook, spare ammunition, ration supplies and a rudimentary medical kit containing enough synthflesh and bacta to keep a wounded soldier alive until a medic can arrive. While neither is part of the official-issue kit, most utility belts also include and carry multitools and a pack of sanitary wipes.

All in all, the Phase I is a well-rounded armor that fares adequately in nearly every combat situation, and while it doesn’t excel in any area, it also doesn’t have any major drawbacks. It's an evolved form of the armors used in the wars of the past, brought to the standards of the modern era of shawken.
 
RESEARCH REVIEW
-----
Star Wars Canon:
Pending initial review
------
Starwars Chaos:
Pending initial review
------
WITHOUT DEV THREADS
Pending initial review
------
WITH DEV THREADS
Pending Initial review
------
SUGGESTIONS
Pending Inital review
 
Alright, I like the very in-depth nature of the sub, there are a few things though:

Can you link the company under Manufacturer? Also, if you have a link to the website you got the image from, could you also link that here?

Also, the strengths and weaknesses sections seem to be missing.

Darth Erebos said:
Quality: 7 Defense Rating 1-10 Slug defense: 8 Lightsaber defense: 8 Blaster Defense: 8 Impact defense: 8 Mobility: 8
Could you clarify on what this means exactly? If all the defences are 8, would the armour not also be Quality 8?

Darth Erebos said:
Sandwiched in between is the MR-fluid based liquid armor system.
Is the Smart Fluid a prior sub? If so, could you please link it? Otherwise, is there an equivalent you used as a source? Thanks!

[member="Darth Erebos"]
 
Alrighty, thanks!

As it is high quality-low weight armour that is produced on a mass scale, I'd need to ask for a dev thread of 10 posts.

Alternatively you could up the weight and reduce the Quality to at least 7.

[member="Darth Erebos"]
 
Awesome, could you also increase the weight by about 3 kg, seeing as the equipment and the materials are a bit heavier than comparable armour?

[member="Darth Erebos"]
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom