ok building an army.

[Lyth Meran]

im currently looking up some tank, walker,droid and ship designs.

and

for example.

 

[Lyth Meran]

i am also thinking these for stormtroopers

mage Source:
http://djahal.deviantart.com/art/plazma-heavy-352176572
http://djahal.deviantart.com/art/plazma-heavy-female-358789126
Intent: To Provide The new republic with armor

PRODUCTION INFORMATION
Development Thread:

• As Needed

Manufacturer:
Model: Not Applicable
Affiliation:
Modularity: Yes

• Any weapon, system, or armor plate configuration can be changed to fit the wearer's desires.
• All aesthetics are Modular.

Production: massproduced
Material: Durasteel Duraplast, Armorweave, Electronics

TECHNICAL SPECIFICATIONS
Classification: Mulitpurpose
Weight: 10 Kilograms
Quality:

• Plates: 10
• Armorweave: 7

Special Features:

• Blaster and stab resistant
• EMP/Ion Resistant Helmet

Armor

• Power Armor Liner, Thermal Gel
• Temperature Regulator, Climate Control
• Hermetically Sealed, Sealing Foam
• Power Pack
• Digital Life Support System

Helmet

• Military Grade HUD, Internal Overlay Display
• Non powered exo skeleton for weight distrebution
• Audio/Visual Recorder
• Polarized Anti-Flash Lenses, Electrobinoculars (X20), Range Finder
• Multi-Frequency Targeting and Acquisition System, Multi-Spectral Target Assessor
• Sonic Dampeners, Annunciator
• Broadband Antenna, HoloNet Access, ComLink
• Combat, Pineal Eye, Visual, Motion, Thermal, Audio Sensors
• Infrared, Echolocation, Radar, X-Ray, Life Form Scanners
• Environmental Filter, Rebreather, Oxygen Filtration System, Nutrient/Water Dispenser, Oxygen Tank (30 Minute Supply)
• Copper Faraday Cage

Back Plate

• Incitatio Jetpack

Wrists

• Retractable Knuckle Plate Vibroblade
• Modular Weapons Mounts (2) Subbed Separately or Pulled From Cannon
  DUR-24 Wrist Laser (1), ZX Miniature Flame Projector (1)
• AT-1 Wrist Slugthrower (1), MM9 Missile Launcher (1)

Shoulders

• Modular Pistol Mount (1) Subbed Separately or Pulled From Cannon
  DX-2 Disruptor Pistol

Knees

• kneepads

Boots

• Grav-Boots
• Magno-Grip Soles
• Retractable Combat Blade (1)

Combat Harness

• Grenade Hooks (6)
• Ammunition Pouches (4)
• Ion Flares (3)
• Grappling Hook Launchers (2), High Tension Wire
• Combat De-Ionizer, Blast Energy Sinks
• Energy Rations, Canteen, Medpacs (2)
• Anti-Security Blade, EMP Disruptor Stylus, Field Disruptor Overloader

DESCRIPTION

Each suit contains a number systems, offering them a level of adaptability. Each suit is hermetically sealed containing a small hour long oxygen supply, a thermal regulator to allow the warrior to remain comfortable in desert or arctic temperatures. It has limitations on its abilities, unable to protect against fire and cryoban weapons, but can stave off minor burns or frost bite and allow the warrior to survive in the vacuum of space for a limited time. Other than the inside of joints, the armor contains a layer of thermal gel to add resistance to blaster weapons, in addition to the power armor liner protecting the torso and waist, reducing the kinetic force of blasts. While it may not keep the warrior conscious the intention is to reduce fatalities. It has a camoflage coating, capable of adjusting its colors to match its surroundings, like from forest to desert or solid Mandalorian colors and symbols. Additionally, so long as the warrior is not in combat, flight, or using systems that put out energy signatures or signals, it provides a form of sensor negation, making it difficult for them to be picked up on sensor scans.

The boots of the armor may be used as either grav boots, assisting in flight maneuvering while within a planet's gravity well, or allowing the warrior to hover slightly above the ground on its on. The soles of the boots are magno-grip, allowing the wearer to lock themselves onto metallic surfaces, which can be incredibly useful in the right situation. The gauntlets contain a pair of modular weapon slots that can be easily exchanged between combats and it can either be equipped with a retractable vibroblade from the the knuckleplate. The armor has an attachment on the back plate for a shielding system similar to the Hyperion Combat Armors. It projects a small ray shield over the chest, back, shoulders, and upper arms that can survive one or two lightsaber strikes. It should be noted this cannot be combined with any other energy shield.

Finally the helmet is fairly standard, is fitted with a sensor range of about one hundred meters. The visor is photoabsorbant allowing solar energy that hits the visor to recharge the internal batteries, allowing the helmet to be used almost indefinitely without having to replace the battery. The Helmet has a copper faraday cage to protect the delicate internal systems it houses. The aesthetics of the helmet are easily changed and altered to the wearer's desires.

The armor contains a power supply that weighs three kilograms and provides the suit with a plethora of power for its systems, roughly equal to thirty power cells. The armor has places for shoulder mounted flash lights and helmet mounted lights for dark environments. Finally the armor has a tactical combat harness with a variety of tools and equipment options, as well as pouches and holsters for weapons.

 

[RC 212]

Nice work! Ill be active in a bit, cleaning my house first

 

[Lyth Meran]

[member="Jack Raxis"]
that sub is esentialy a rip off of a mando armor sub.ill make personal dev to prevent any plagerism this was a demmo.
im looking up a few walkers.

 

[Sanya Val Lerium]

[member="Lyth Meran"] if you would like you can exchange that jet pack for the one in my company.

 

[Lyth Meran]

[member="Sanya Val Swift"] sure.
link it.

 

[Sanya Val Lerium]

[member="Lyth Meran"]

Incitatio Jetpack

 

[Lyth Meran]

[member="Sanya Val Swift"]
in fact would you be ok with me adding it to this?
http://starwarsrp.net/topic/94729-mynock-flight-armor/#entry1377019

 

[Sanya Val Lerium]

[member="Lyth Meran"] go ahead

 

[Lyth Meran]