Naast's Beskar'gam

[Naast Vizsla]

Image Source: https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/p480x480/10629272_581056448705291_1030571409416022764_o.jpg
Intent: Personal armor for Naast Vizsla
Development Thread:
http://starwarsrp.net/topic/81186-development-and-such/

Tal and Naast discuss plans for the new armor and forge the beskar plates
Manufacturer: Naast Vizsla
Model: Beskar'gam
Affiliation: Naast Vizsla
Modularity: Yes

-Can swap out plates
-Can add or remove power pack
-Can change equipment used on gauntlets
Production: Unique
Classification: Body Armor
Material: Beskar, Euk'gar, armorweave
Weight: 22 kg
Quality: 9
Special Features:
Helmet:
-360 degree HUD
-Internal overlay display

Spoiler

-Thermal Vision
-Night Vision
-Comlink
-Sonic Dampeners
-Annunciator
-Infrared, life form scanners
-Rebreather, Oxygen filtration system, Oxygen tank (45 min supply)
-Audio/Visual recorder
-EMP proof helmet
-Electrobinoculars (x30)
-Rangefinder
-copper faraday cage
-Multi-frequency targeting and acquisition system

Neck:
-Armor piece covering neck for added protection

Back:
-Powerpack (Supplies power for shielding)
-Jump Pack (Built into powerpack)
-Hardpoint for adding/removing things such as powerpack, jetpack, etc.
-Power pack/Jump pack

Armor:
-Plates dipped in rubber (less noise, added stealth)
-Thermal Gel liner
-Climate control
-Digital Life support system
-Combat shielding unit

Spoiler

Wrists:
-2 modular weapons mounts
-Flame projector (One per wrist)
-Wrist rocket (One per wrist)
-Shockboxing gloves (Also compatable with crushgaunts)

Boots:
-Grav Boots
-Rocket boot attachment

Combat Harness:
-Blast energy sinks (2)
-Anti-security blade
-Medpacks (2)
-ammunition pouches (4)
-Grenade hooks (6)
-Vibroblade sheath
-Grappling hook launchers (2)
-Combat de-ionizer

Description:

Red to honor his parents, yellow for vengeance.

This armor was created for the sole purpose of defending Naast Vizsla in his confrontations with both lightsaber wielding and blaster wielding enemies. It is made of beskar and has components made of euk'gar. The armor plates and helmet are made of beskar, while the chainmail undershirt is made of euk'gar. It also features an armorweave bodysuit. It has a ray shielding unit, with emitters on the arms. These ray shields can be projected to cover the outside of the arms and are powered by a back mounted powerpack. The ray shields can be used for up to 6 hours before the powerpack must be recharged. The powerpack is made of euk'gar, but if it is damaged, it can explode. This poses a threat to the wearer. Weak points in the armor include the bicep and joints.
Sources:
http://starwarsrp.net/topic/80474-naasts-armor/
http://starwarsrp.net/topic/79221-oriramikade-eukgargam/
http://starwarsrp.net/topic/79483-marius-eukgargam/
http://starwarsrp.net/topic/79377-drahrkandar/
http://starwarsrp.net/topic/17904-hyperion-combat-armor/
http://starwarsrp.net/topic/80474-naasts-armor/

 

[Writer]

RESEARCH REVIEW
-----
Star Wars Canon:
Pending initial review
------
Starwars Chaos:
Pending initial review
------
WITHOUT DEV THREADS
Pending initial review
------
WITH DEV THREADS
Pending Initial review
------
SUGGESTIONS
Pending Inital review

 

[Writer]

[member="Naast Vizsla"]

Do you understand the requirements for acquire Beskar?

 

[Naast Vizsla]

I believe being a member of the mandalorian faction with a development thread of ten posts, designing and making the armor is what is needed?

Characters belonging to the Major Faction whose influence covers Mandalore and/or Concordia are exempt from fulfilling this objective.
All tech submissions involving Mandalorians using Beskar will require a forging or construction thread of at least 10 posts where the item is made.

Taken from the post in which the rules are explained
[member="Pixel"]

 

[Writer]

[member="Naast Vizsla"]

I wanted to ensure you knew but as I was reading over your development thread I noticed you stopped when your character was about to start forging.

I'm going to have to ask you continue the development and complete the forging with additional posting in order to fulfill the requirements. Given you have done ten posts already, I will accept five (or more) additional posts of substantial length and relevance for forgiving the actual armor.

 

[Naast Vizsla]

I wasn't sure if it was optional for the thread to involve the actual forging or if designing the armor counted as a "construction" thread
[member="Pixel"]

 

[Writer]

[member="Naast Vizsla"]

Mandalorian characters are required to use the ten posts to Forge. Since you've already designed it - just go ahead and start hammering out those posts and forge it.

 

[Naast Vizsla]

Will do, I'll tag you when I'm done
[member="Pixel"]

 

[Writer]

Moved to Archives - PM [member="Spencer Jacobs"] for removal / if denied for Second Chance please post and tag Spencer Jacobs for review.

Thank you!