Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech EX-Prototype Alpha I - AKA 'Wanderer EXO"

Status
Not open for further replies.
the_stranger___destiny_fanart_by_novrehs-d8bko4q.jpg
Image Source: Destiny - Exo Stranger, Fanart done by iamNOREHS at Deviantart
Intent: To create a sub for the body and applications of a character
Development Thread:
Manufacturer: Unknown as the model was built long ago, Cerberus Enterprise for upgrading the droid.
Model: EX-Prototype Alpha I
Affiliation: Itself.
Modularity: Limited (will require a dev thread for anything else to be added on.)
Production: Unique,
Material:
  • Titanium,
  • Desh-Terenthium,
  • Tungsten
  • Synth-Flesh,
  • Brain,
  • Bone,
  • Flesh,
  • Artificial Skin.
Classification: Fourth Degree
Weight: 95 kgs (about 210 lbs)
Height: 1.9 meters (about six foot)
Quality: Armor quality of 5
Movement: Repulsorlift, Bipedal,
Armaments: Armaments or hands.
Strengths:
  • Frame made out of Titanium making it a rather light chassis
  • Desh-Terenthium is used as armor plates.
  • Tungsten is used on the fingers, and the spikes that can protrude from the feet. As well as the spikes on her knuckles.
  • Organic Materials are all stored within the head where a real and functioning brain that has been integrated with a droid brain to produce a "living" droid.
  • Personal Cloaking device installed into the droid.
  • Retractable arm blades. These arm blades can shoot out from the forearm and can be used as a defense tool, as well as prevent falling and sliding.
  • In the feet are two small repulsors (two in each foot) that can be used as a form of a Jump, or used in space as a short distance traveling device. One in each hand are used as stabilizers. (stored within the palm)
Weaknesses:
  • Heavy body makes it really hard to stand on thin sheets of metal, thin ground or other thin walking materials.
  • Can be sensed through the force as she is still "Alive"
  • Can be found by using various scanners
  • Can be hacked into, (manually only as she has no connection to the holonet or anything else like that)
  • Spikes can be bent, preventing retraction
  • While she can jump/Burst run, she can only do it five times in a minute, and must wait five minutes to fully recharge. (One burst per minute)
  • Even if hidden she can be found by scanning, bumped into, or Heard.
Description:
Created long ago by some unknown man, EX-Prototype Alpha I or also known as "Wanderer EXO" is a HRD created from an existing near-human species. While it is unknown what species it came from. However, even the droids own identity is unknown to itself. Programed to forget actions of the past, and therefore is considered an HRD by programing. A chip has been placed inside the brain which is stored in the head of the droid (duh). Force users can still feel that the droid is alive by feeling the actual brain. However, the pulse will be very faint, and would be like feeling a dying person, and not a live healthy one.

As the droid has superior movement and capabilities, it's titanium frame is shaped much like the human skeleton. Literally as though the man who created the prototype wanted to make a completely look alike human, only in droid/robot form. The armor plating, or the "iron skin" is made from Desh-Terenthium as most other droids are. Very malleable, and actually rather thin considering the titanium, wires, and other ligaments created by the titanium take up so much room. Thin enough that it can be easily bent back together by the droid itself. (This is to keep it from snagging on things and other such. Complete repairs will have to be made later.)

Within the arms are retractable blades. These blades can be used for combat, but mostly are to prevent falling, or sliding across surfaces. Should the droid be falling, These blades can be ejected, and stabbed into surfaces to prevent sliding and falling. They can be used as weapons or defense tools. The hands are significant themselves because the fingers are made of Tungsten to be denser than most other metals. Providing that she can slam down her hand into thin sheets of metal, brick, or even walls to give her a grip when climbing, descending, or the prevention of sliding. As well, they can be used as weapons considering she can stab her hand into a guys body, or simply punch them causing more damage than a flesh fist can do.

The legs are also important because stored within the feet are spikes. These spikes can extend up to 12 centimeters in length, and are about 5 cementers in diameter. Made out of Tungsten as well to provide a very dense metal to prevent bending. Bad part is, if these are extended, and do bend, they cannot retract. She will either have to bend them back, or cut them off and replace them.

Within the overall body, The waist, arms, wrist, and head can turn in complete 360 degree motion. Within the hands, covered by a thin layer of metal, is a very small repulsor. As well as two stored within each foot (one in the heal, and one on the ball of the foot) These can be activated on ground surfaces to provide a jump boost, a very fast sprint, or if in space, continued motion within the void.

The calculated jump of straight up is about 10 meters off the ground, and for running it can last for 15 seconds. Within space, the burst of speed is the same, lasting for 15 seconds, however since she is in space, once she starts moving, she won't stop unless another force acts upon her. She can only perform Jumps or bursts five times within a minute before having to recharge. (taking five minutes) However, one jump or burst can recharge the batteries stored within her hips within a minute.

A personal cloaking device is installed into the droid to allow her to phase in and out of the visible light spectrums. However, sound can still be heard, she still can bump into people, she can still be seen on scanners, and infrared can still show up. However she will really only show up as a floating speck of red where the brain is working, and the possibility of her repulsors if recently used.

Primary Source: N/A
 
[member="Silara"], yes this is a Unique Droid body/Armored body in which I will be (hopefully) using for this character and the storyline.

As it says in the intent section:


Wanderer EXO said:
Intent: To create a sub for the body and applications of a character
That happens to be this character. I wanted to get all this information down in one place so it can be approved (should it be deemed worthy) so I can prove that I am not godmodding, or making stuff up as I go along.

As a Side note, thank you for judging my submission.
 
Wanderer EXO said:
yes this is a Unique Droid
Please adhere to the droid submission template, then. Everything is good and such, but the formatting needs to be correct.
Image Source: (Please link to where you found the image, or to the original artist if possible. TinEye or Google Image Search can help.)
Intent: (Example: 'A personal weapon for Darth Scabious' or 'an advanced armored personnel carrier for the Republic')
Development Thread: (The main way people work for their toys, though most submissions don't require a development thread. Restricted items require specific development threads. Substantial development threads can help judges approve more powerful submissions. If in doubt, put 'If necessary,' and a judge may or may not ask you for one. Threads cited here must be at least 10 quality posts.)
Manufacturer: (Kuat Drive Yards, BlasTech Industries, [Character Name], etc.)
Model: (Example: E-11 Blaster Rifle. For submissions where a model wouldn't be appropriate, such as a custom walking stick, put 'N/A' for 'Not Applicable'.)
Affiliation: (Example: The E-11 Blaster Rifle was produced for the Galactic Empire and used almost exclusively by Imperial Stormtroopers. Do not put the company unless the product is only for your company's use. Common choices include 'Open market' or the name of a specific faction.)
Modularity: (Can components of this submission be swapped out for other components? Is it especially easy to modify? For most submissions, put 'No'.)
Production: (The scale is Unique, Semi-Unique, Limited, Minor, Mass-Produced. More powerful submissions are more likely to be approved the fewer of them there are. There are no numbers associated with these.)
Material: (What is it made out of? Certain materials are more resistant, or vulnerable, to certain weapons. Example: 'Durasteel, blaster components.')
Classification: (First Degree, Second Degree, Third Degree, Fourth Degree, or Fifth Degree)
Weight: (Via Metric System)
Height: (Via Metric System)
Movement: (Repulsorlift, Wheels, Tracks, Bipedal, Quadrupedal)
Armaments: (What weapons does the droid possess, if any?)
Misc. Equipment: (Sensors, scanners, shields, etc.)
Description: (Include some strengths and weaknesses here. Describe some of the history behind the submission. Give us some idea of how it might perform its function, what it excels against and what some limitations of it are. This is where you talk about your idea, flesh it out over at least a good-sized paragraph, and address some of the ways it might be used or abused. For especially powerful or ambitious submissions, a very thorough description is recommended.) All droid characters must be approved through the Factory, if their droid models are not canon.
Primary Source: (Please link the source of another writer's submission that you are modifying for your use; only necessary for "Chaos Canon" submissions)
 
[member="Silara"], I would like to note that I have adhered to the forum. I added in these items to define more of the body.



Wanderer EXO said:
Weapon Classification: Fists
Size: Hands
Length: Hand and arm length
Weight: Hand and arm weight

Wanderer EXO said:
Quality: Armor quality of 5
Because she will be in battle, I thought it was appropriate to add in the fists as weapons considering they are made of tungsten, as well as the armor rating to define how well/poorly she can take hits according to the armored plating. If I need to take these out then I will do so.
 
Silara said:
Classification: (First Degree, Second Degree, Third Degree, Fourth Degree, or Fifth Degree)
This should be Fourth Degree. (I initially missed this).


Wanderer EXO said:
Weapon Classification: Fists Size: Hands Length: Hand and arm length Weight: Hand and arm weight
Simply put Armaments: Hands or Armaments: None (Either work, as it's an HRD and can carry weaponry).

Also, remove the length/width sections you've added. There's no real reason to include the armor quality, but I'm not going to fuss over it.
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom