Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech Sasori Powerblade

Status
Not open for further replies.
Emberlene's Daughter, The Jedi Generalist
Ks68rqI.gif
OUT OF CHARACTER INFORMATION
PRODUCTION INFORMATION
TECHNICAL SPECIFICATIONS
  • Classification: Blade
  • Size: Average
  • Weight: Average
SPECIAL FEATURES
  • Advanced Power Source: Designed with an iso-didact power source giving it a massive and long shelf life.
  • Piercing Power: Designed to cut at a molecular level and able to go through some of the toughest materials with a solid stab. Beskar and vong crab armor are rarely an issue when given a good element of surprise.
STRENGTHS
  • Laminanium: Designed like a Quellian ship the hull of the orbital platforms has a thin layer of the material to improve repairs and over time depending on the amount of damage it is able to patch itself up.
WEAKNESSES
  • Built in power source: Designed with its own internal power source that is long lasting but it is largely able to power the armor and systems of the vehicle but when damaged it is highly explosive.
  • Self Repairing: Built with a protective layer to patch the vehicle in the event of damage. The time table is dependent upon the amount of damage with smaller tears being easier and faster to repair then gashes which can take hours to reform.
    • Note: Only the layer can repair not the full plate armor itself the plating can be damaged still but the underlayer of Laminanium can reform and remain.
DESCRIPTION
Designed By sasori as an improvement and using the techniques in the sasori model staff. The tubing is telescopic collapsing upon itself so that it can be less intrusive on the wrist. The blade's guide is a thin wire it can be used with and once activated will burn for twelve second super heated plasma on par with a lightsaber and able to slice into metal or a person. Then it will need to cool down of nine minutes as the wire cools to not snap between uses, the power cells have been improved using another product from the small zeltron the operative bracers. Their diathium power cells proving superior for being used in wrist based weapon. The casing of the blade is lightweight and being made telescopic can be bent easily or damaged when extended during those few seconds it is activated.

The power systems over the previous two models has been enhanced, using the suits power systems and more regulated allowing for a balance. The blade works for twelve second over the previous ten of the MK II and burns hot enough to slice through class seven armor (being non saber resistant). The indicator moving to the tactical pad of armors of the HUD within the suits systems. Showing how much power it is using and another small improvement over the previous two models is the use of containment allowing for it to recharge itself briefly but it still expands larger amounts of energy. The previous seven uses has doubled to fourteen uses with the limitations it won't protect against saber deactivating more then likely if the blades are locked and breaking or melting.

With more work and a tried and tested method behind the blade they were able to largely improve its design... gone is the guide wires and super heated filiment instead using a monomolecular energy cord along the molecule thin edge to enhance the cutting power when activated the blade can easily be worn by soldiers or spies as needed. Sasori has even fashioned them to be a sort of self defensive measure for dancers or hostesses who might have the risk of customers getting too handsy. With the improvements though it was more then just being a MK. II version and has mostly become its own product compared to many of the others.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom