Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Approved Tech H1 Battle Droid

Status
Not open for further replies.
02219f1c1147a665d656de7d1742f717-d94i621.jpg

OUT OF CHARACTER INFORMATION
  • Intent: An advanced droid for the army of the Confederacy of Independent Systems
  • Image Source: Deviantart
  • Canon Link: N/A
  • Restricted Missions: Durasteel, droid parts, etc.
  • Primary Source: N/A

PRODUCTION INFORMATION
  • Manufacturer: Hansol Mining Corporation
  • Model: H1 Battle Droid
  • Production: Limited
  • Affiliation: Hansol Mining Corporation, Confederacy of Independent Systems, Closed-Market
  • Modularity: No
  • Material: Durasteel, droid components

TECHNICAL INFORMATION
  • Classification: Fourth Degree
  • Weight: 80 kilograms
  • Height: 2 meters
  • Movement: Bipedal
  • Armaments: None, can be equipped with any handheld weapon
  • Misc. Equipment: Shield Arm
  • 1780591bc45ad3ec93775cdaadcbf018.jpg
  • source: Artstation

SPECIAL FEATURES

Strengths:
  • Shield Arm: The left arm of the H1 has a deployable shield capable of absorbing blaster fire and can be changed to fit the scenario, although the three bases are a: a square shield for full coverage, a similar one with a hole to fire out of, and a small shield for use in firefights; although using this drains the droids power, and if left on, cuts the battery life to a quarter of its normal operating time
  • Memory Flash: The droid has the ability to have flash memory applied to it, much like some clones were given at the end of the Clone Wars, however, due to its droid brain, it is able to not go insane like many of the clones did. This makes them as experienced as their progenitor.
  • Best of Both Worlds: The H1 was designed to have the strength of a droid, with the agility of a living being

Weaknesses:
  • Limited Longevity: Because of the flash memory, these droids programming degrades over time, and after two years, they have an automatic shutdown to prevent rampancy which sometimes leads to them becoming murder robots
  • Light Armor: Other than their shield arm, these droids have only a thin layer keeping the outside from their delicate insides, and a hit anywhere on their body will penetrate, and most likely rip the limb off

DESCRIPTION


These droids were designed as replacements to the B1 Battle Droids for the CIS. They were designed to be significant improvements over their predecessors, with the ability to use the skills of others to their advantage. To make the Memory flash work their chassis' were designed to mirror the movements of a humanoid nearly perfectly, helping remove the clumsiness a droid usually has, though they are not perfect replicas, and in fact are easily distinguishable as droids. These droids are formidable opponents to any would-be attacker, being just as agile, and having the strength of a droid makes them capable in a fist fight as well as a firefight.


Thier shield arms allow them to block incoming fire for a sustainable amount of time, it is a modified Death Watch Portable Shield that is able to cover a wider area because of the
droid's larger battery. It is able to sustain continuous fire for sustained periods of time.
 

Netherworld

Well-Known Member
Hello, I'll be the factory judge reviewing your submission. If you have questions, please feel free to respond to this thread once we are underway.
 

Netherworld

Well-Known Member
[member="Galven Hansol"]

Looks good for the most part.

I'd like you to detail the shield a bit more, since it seems to be their main selling point. If there's Chaos or Canon tech behind it, please link it in the submission.
If not, describe its capabilities in more detail. How much fire can it endure? How long does it last? Can it block only blaster bolts, or does it provide protection from lightsabers and physical weapons as well?



Galven Hansol said:
their chassis' were designed to mirror the body of a humanoid nearly perfectly, muscles and all.
  • That sort of thing should be listed under Materials. Furthermore, this would put them far closer to HRDs than actual droids. Can you please specify to what degree they are made to be like humans?
  • Furthermore, you essentially want a product with the strength of a droid, but without its physical downsides. I can get behind that concept, but not at Mass production. If you drop this to Limited, I can see this working. Otherwise, that's going to require some tweaking.
  • Finally, that capability should be listed under Strengths.


Galven Hansol said:
Thier shield arms allow them to become walls of impenetrable droids to any incoming fire, although they are only impenetrable from the one shield side, all other sides are just as venerable as normal.
  • Nothing is impenetrable. Please remove this wording and see the first request for details about the shield.
 

Netherworld

Well-Known Member
[member="Galven Hansol"]



Galven Hansol said:
able to take hits from thermal detonators
  • Drop this and we're good to go. The canon article lists no such capability, and the operation of a thermal detonator in itself would make any type of shield useless anyway.
 
Status
Not open for further replies.

Users who are viewing this thread

Top Bottom